Question about Kenwood KDC-W3037A CD-receiver, 4X50W MP3/WMA/CD-Receiver CD Player
Hi My display is intermittently blank, yet the unit still works. I read ideas about taking out the cd unit and resoldering the 2R7 surface mounted resistors. I have taken out the CD unit and there are no surface mounted resistors there - just the standard resistors with colour codes - the wires go through to the underside of the board. Are there any other solutions I could try?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I found my Kenwood KDC322 faceplate doing the same thing(cutting out) I cleaned the contact points on this 'ribbon' behind the faceplate by rubbing the discoloration off with a pencil eraser. The lights have not cut out again.
Posted on Aug 23, 2007
the resistors are not in the face plate, but on the main motherboard inside the deck itself. usually on the right side of the board.
Posted on Apr 19, 2010
I had the same problem and I resoldered the resistors on the board inside the stereo and it worked. Unscrew and remove the top cover and the CD slot. There are 10 of them located on the lower right side of the board. Good luck.
Posted on Sep 20, 2010
Tips for a great answer:
Feb 11, 2014 | Marantz CD5001 CD Player
Jun 03, 2009 | 2004 Mazda 3
May 29, 2009 | HP (344542-005) DVD Drive
Apr 06, 2008 | Yamaha CDR-S1000 CD Player
Apr 06, 2007 | HP LightScribe dvd640i (DVD640I)...
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: