Question about Washing Machines

Open Question

Hoover optima OPH616 will not spin or drain

Will wash but will not spin or drain

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: How do you remove the filter for a Hoover washing

I included a link on Youtube to my Nextra where I show how I clean the filter (watch it from 08:55 onwords). Just remove the kick strip and unscrew (philips screwdriver needed) the little screw on the filter itself, then turn it anti-clockwise but while you're doing this make sure you insert the kick strip underneath to gather the residual water. Repeat this operation 3 o 4 times until the sump is totally empty, make sure you don't let the kick strip fill up too much otherwise you'll be spilling water all over the place, so just turn the filter clockwise everytime you want to stop the trickle of water. It's not too complicated and it won't be too messy if you follow these instructions carefully. Good luck ;-)

Posted on Nov 05, 2009

  • 3 Answers

SOURCE: hoover optima hnf6167 7kg washing

My washing machine completes its cycle but is leaking water from the left hand side on to the floor, Why is this???

Posted on Apr 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hoover optima washer drains but won't spin. Help


I would suspect the timer contacts are burnt .

Mar 04, 2015 | Hoover Washing Machines

1 Answer

Hoover optima 614 drum wont spin


Either a broken drive belt or a failed transmission.

Jan 12, 2015 | Hoover Washing Machines

1 Answer

My hoover optima 7 kg 1400 aaa will not go into the spin mode ?


drain pump needs to be replaced, washer needs to be empty then will spin. please comment.

Dec 03, 2014 | Hoover Washing Machines

1 Answer

Nextra6.will only go on 40min wash and only spin on slow spin. checked motor brushes and there fine. is it the circuit board


I have a hoover optima 1400AAA, it began to give trouble with programs, 40 degrees washed at 80 degrees, would not spin or empty, etc, called in a hoover repair man who cost me 120euros to remove the program knob and spray the contacts with Servisol super 10 switch cleaning lubricant, apart from the fact that I am still furious, everyone who has a hoover washing machine should know this.

Mar 21, 2012 | Hoover Nextra HNL 3166 Z Front Load Washer

2 Answers

Can anybody tell me where I can find out the programme time


Generally a normal cycle on a washer is about 40 - 50 minutes, depaning on your options.

Dec 15, 2009 | Hoover Washing Machines

1 Answer

Water not draing away and machine is not spinning


Empty your machine manually by lowering the drain hose into a bowl or bucket. Then remove the kick plate and check the filter for blockages.Before replacing try the machine on drain to see if the pump is running, if problem persists there may be a blockage in the pipe from the drum to the pump.

Nov 15, 2008 | Hoover Nextra HNWL 3136 Front Load Washer...

1 Answer

No draining on washing machine


I am not an expert on hoover - mainly hotpoint...but..

To empty your machine of water reset the programmer to Final spin. the machine should empty normally.

On hotpoint if you have a fast flashing light its most likely to be 1 of 2 things.

1. The belt from the motor has broken. (price for belt is less than 20 pounds.)

2. The brushes in the motor have worn down too much to make the drum turn. Look underneath the washing machine to see if black power (Carbon) is deposited under the motor.
(Price for set of brushes is less than 20 pounds)

Labour should be no more than half an hour by anyone decent.

Regards

Feb 21, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...