Icon not detected - Computers & Internet

this may help
http://www.makeuseof.com/answers/turn-service-detect-network-status-windows/

Connect to WiFi for Your Apple iPod touch b> The iPod touch has the ability to connect to Wi-Fi networks, giving you access to information while on the go. The iPod detects both protected and unprotected networks, and can remember which Wi-Fi networks you have used before, eliminating the need to enter passwords more than once. Your iPod touch should automatically detect wireless networks, but you can also manually connect to a network or switch to a new one.

Tap the "Settings" icon on the home screen and tap the "Wi-Fi" button. Tap the "On/Off" button to turn your Wi-Fi on. Press the "Home" button to return to the home screen. Tap the Safari Web Browser application or any other application that requires Internet access. A list will automatically open on your screen that names all available networks. Tap the network you wish to use from the list. The networks listed are all wireless networks detected by the iPod. Protected networks will have lock icons to the right of their names. Enter the password if the network you have selected is protected. Your iPod touch will store this password for future use. Type in the name of the network you wish to use if it is not listed. A network that is set to not broadcast will not show up on the list of available networks. Check the top left of the screen for the Wi-Fi icon to be sure you have connected. The number of bars on the icon indicates the strength of the signal. b> Manually Connect Tap the "Settings" icon on the home screen and tap the "Wi-Fi" button. Tap the "On/Off" button to turn your Wi-Fi on. Tap a network listed under "Choose a Network..." The networks listed are all wireless networks detected by the iPod. Protected networks will have lock icons to the right of their names. Enter the password if the network you have selected is protected. Your iPod touch will store this password for future use. Type in the name of the network you wish to use if it is not listed. A network set not to broadcast will not show up on the list of available networks. Check the top left of the screen for the Wi-Fi icon to be sure you have connected. The number of bars on the icon indicates the strength of the signal.

b>

1
Launch the Logitech QuickCam software by either double-clicking the QuickCam icon on your desktop or clicking the QuickCam icon in your system tray.

2
Click on the QuickCapture icon to launch QuickCapture.

3
Select the video size that is needed by clicking on the small arrow where it says "Video Size" to the lower right of the picture.

4
Click on the arrow on the button that says "Record Video" to open the Video Options window.

5
Clear the check mark next to "Enable Motion Detection."

You go your control panel and select your printer icon Double click this icon. Left side have (Add Printer) option & than add your printer. Or go to you control panel just click add hardware icon, after you select your printer icon & after your Printer model. After you show your CD device.

Take the Battery back Its defective , New batteries should charge for 18-24 hours, and the computer should tell u that it wont run till the battery is fully charged.

1. First, you have to make sure that the Wi-Fi of your laptop is turned on.

2. Make sure that there's an available wireless network in your area so that you can test if the computer can detect any available network.

3. If you're running Win XP, right-click the wireless icon on your system tray and select "View available wireless networks"

4. If you can't detect any wireless network, right-click the wireless icon on your system tray and select Open Network Connections.

5. Right-click the Wireless Network Connection icon and make sure to enable it.

6. If it's already enabled, try to disable it and then re-enable it.

7. If you can't still detect any wireless network, try this:
- Click the Start > Run > type msconfig > hit Enter

8. Locate the Wireless Zero Configuration and click on it once.

9. Once it's highlighted, locate the Start button on the upper left hand corner of that screen.

10. After starting the Wireless Zero Configuration (WZC), try to detect the wireless network again.

load uaa driver if problem not solve change speaker

Hi insert tape mark digital the detection will on icon.

Hello, right click on icon and click open. Or double left click on icon and see what it tells you. I sounds like cable or power has been disconnected. Could be driver needs reinstalling. Could be a number of things. Click on icon and see what it tells you. Hope this helps..

When pouring a chilled beverage into a glass, water droplets may form on the surface of the glass. This happens because the air around the glass is rapidly cooled down, and moisture in the air adheres to the surface of the glass. This phenomenon is called condensation. This kind of condensation may also occur with camcorders. If you continue to use the camcorder with condensation on it, it could damage the camcorder. Condensation may form on the camcorder in the following cases: (1) When being moved from a cold place to a warm place (2) When being used in a rapidly-heated cold room (3) When being used in a humid room (4) When being moved from an air-conditioned room to a warm, humid place When condensation occurs: The camcorder stops operating automatically after its power lamp flashes. The warning message "CONDENSATION HAS BEEN DETECTED" appears and the condensation-warning icon below starts flashing. Condensation-warning icon If a cassette is loaded, the warning message "CONDENSATION HAS BEEN DETECTED" and "REMOVE THE CASSETTE" appear and the cassette-warning icon starts flashing. Cassette-warning icon If a cassette is loaded in the camcorder, remove the cassette immediately and leave the cassette compartment open. If condensation is detected, the POWER switch and cassette-removing switch will be activated. Leaving the cassette in the camcorder may damage the tape. A cassette should not be loaded into the camcorder when condensation is detected. How to avoid condensation Unload the cassette and place the camcorder in an airtight plastic bag when moving to locations where temperatures vary. Allow time for the camcorder to adjust to temperature changes slowly before removing it from the bag. Resuming use Allow at least one hour before resuming use; more time may be required for heavier condensation. When condensation has been eliminated, turn the camcorder on. After the condensation-warning icon stops flashing, wait one hour before resuming use.