Question about MSI Wireless-G RG54G3 Router

1 Answer

Can't log in to the router...

Hi big problem, blocked all the computers in the house with the router so that the kids couldn't go on the computer whilst at work, but cannot get back into the router to enable again, help...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,961 Answers
Re: Can't log in to the router...

Assuming you know the ip address to get in your router (, the password and username both being admin, you may have to connect via the RJ45 ethernet cable and remove or delete the security settings or whatever you used to block the connection. If you are not able to get into the router at all then there is a reset button to the right of the power connection, hold this down with a pen tip or paper clip for more than 5 seconds, this will reset it back to factory settings and enable you to start again with the set up. If you do not have the manual then you can download it from the link below.

Posted on Jul 04, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I can't logged in my facebook account....even in other browser but my brother's facebook account can log in..... whenever I log in....i get this some kind of notice "Something went...

This happened to a friend of mine a couple of weeks ago. First, I would suggest restarting the computer. My friend simply waited (it was a day) and the error went away. It seems to be an error on Facebook's side, since trying to login onto that account anywhere has the problem (another computer, phones, etc.). Sorry I couldn't give a definitive answer, but if in a day it's not back to normal, you can always contact Facebook directly at 650-543-4800 (granted this phone stinks what from I've heard, but it's better than nothing).

Jun 19, 2011 | Check Point Routers

1 Answer

I have a 655 router.. running windows7 on one computer on Home Network.. Router initially working connected via cat5 wire. Disconnected router, moved to new location on desk...reconnected...

You can reset both the modem and the router by removing the power cord where it connects into the router (Called Recycling the Power) I would do it with both the modem and the router for about a full 2 minutes.
Sounds more like you have a connectivity issue from interference from something on you desk. Some known culprits are:
High Intensity Lamps Fans Radio Interference coming from your wireless phone Power strip with filters for telephone signal any other environmental issues including computer monitor. Next door neighbor's router signal bleeding through. Filter device missing from phone Filter device missing from phone line connected to you TV
Try moving the router back to the old location. Does problem go away. You are now too close to something thats breaking your signal. I can log into my neighbors access point across the street and two houses away. Signals are strong but can be blocked by a lot of things mentioned above or tin foil.
Check it out,

Jun 03, 2011 | D-Link DIR-655 Wireless Router

1 Answer

How do i unlock my netgear wgu624 router ?? i forgot my security password, and i'v been trying to make a WiFi connection with my ps3 from the house computer, i entered the default code and it now sends...

I'm not familiar with the term "unlock" as it relates to that router, but see if this helps:
The product manual, found here, gives detailed instructions on how to log on and set up the configuration for your devices. It also has information on how to use the reset button or menus to reset the router to the default ID and password.
I suspect that you have already done this, which would tell me that the house computer was configured in the router and that was dropped during the reset. Your next step will be to examine the configurations on the router, the PS3, and the home computer. Look for any differences between those configurations and make whatever changes are required to make all three match.
Good luck.

Jan 10, 2011 | NetGear WGU624 Router

1 Answer

I have used this router for 2 years inone home attached by cable to a desktop and at the same time set up for wireless for other laptops in the home. I have got a new router for that house, but want to use...

1. Yes, clear the router for the new house.
follow these instructions:
1.Log into router
2. Verify wireless router name( on the computer) >>> ( on/off)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP adresses.
5. Set the laptop up in the router by WEP KEY or MAC address.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.

Jul 03, 2010 | D-Link DSL-G604T Wireless Router

1 Answer

Trying to access my 2wire router

Please try the following:

1. Check the ip address and default gateway on the computer by typing ipconfig in command prompt.

2. Try to ping the default gateway from the hardwired computer.

3. If you are able to ping the default gateway, but not able to log in, Delete Cookies and check if you could log in.

4. If you still could not log in, try from another web browser.

Mar 31, 2009 | 2wire (1000-400108-001) Router

1 Answer

Wireless network


there will be lots of reasons that computer is not detecting the wireless network
1. you can check teh firewall or any anti virus might be blocking it
2. you can check teh wireless switch must be ON
3. you can also check teh wireless card must be enable
4. last you can try to reinstall the wireless card
5. still if you are not able to see it then you can try to change teh wireless settings like channel and security type on teh router

I hope that will resolve your concern

Harmeet :)

Mar 29, 2009 | NetGear MR814 Wireless Router

1 Answer

New computer, router dropping sites?

Log on to the router and make sure that these sites haven't been placed in a block list for whatever reason.

Check the Netgear website for firmware updates required.

Feb 20, 2009 | NetGear FVS318 Cable/DSL ProSafe VPN...

1 Answer

Cant connect

Hi! Did you go into the router configuration through IE (Internet Explorer)?

May 24, 2008 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

Wireless connection of netgear wireless router for compaq laptop

Sometimes firewalls on your computers can cause connection issues. I had the same problem with my home network. I had norton internet security 2008 on both systems, but the firewall settings on both computers had to be adjusted to allow the computers to talk. If you have different brand firewalls on each computer, you should consider to switching one of the computers so that it matches the other.

Another thing you want to do is log into the router's web utility and check to see if the wireless settings are blocking wireless connections in some way. You also want to make sure the ssid broadcast is enabled.

Finally, you really should consider using security on your router, so wireless connections would be password protected. I suggest wpa personal.

May 03, 2008 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
MSI Wireless-G RG54G3 Router Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top MSI Routers Experts


Level 3 Expert

18258 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

4327 Answers

Are you a MSI Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides