Question about PC Desktops

1 Answer

Dear, I have installed the Red Hat Enterprise Linux Server on Intel based m/c motherboard D945GCR. I can't able to install the NIC driver.Tell me the procedure how to install or where i can find this driver on internet. Thanks & Regards, Neil.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 259 Answers

Most drivers I get are on the web site driverguide.com but you need to register and it is free

Posted on Jan 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to run Win Server 2008 Enterprise edition on Dell Optiplex 360. I need the drivers for: NIC, Audio, Video. Thank you


Hello,

Verify that your hardware is compatiable to the Server NOC. (Most are 64-bit software which require 64-bit compatiable software. When you place the server dvd/cd in the 1st time, it will check your system to make sure it meets the minimum requirments for install. If you already have the server os installed, You have 2 chioces: 1. Microsoft Server drivers (Microsoft support) or 2: Download each vendor's drive to your system or portiable drive and install as the server os is installing. (it will ask for 3rd party drivers at the start of install.

Good Luck
C2Solutons

Jan 22, 2011 | Dell OptiPlex 360 Desktop Computer

Tip

How to run a guest operating system inside a host operating system without dual...


Install virtual box from : Download VirtualBox

VirtualBox is a cross-platform virtualization application. What does that mean? For one thing, it installs on your existing Intel or AMD-based computers, whether they are running Windows, Mac, Linux or Solaris operating systems. Secondly, it extends the capabilities of your existing computer so that it can run multiple operating systems (inside multiple virtual machines) at the same time. So, for example, you can run Windows and Linux on your Mac, run Windows Server 2008 on your Linux server, run Linux on your Windows PC, and so on, all alongside your existing applications. You can install and run as many virtual machines as you like -- the only practical limits are disk space and memory.


Follow the instructions on
Chapter1 First steps

on May 27, 2015 | PC Desktops

Tip

DHCP Server configuration in Linux


Linux is a UNIX based operating system. It is a server operating system. REDHAT Linux is Enterprise version of Linux. Now a day's Most of corporate sectors use red hat Linux as server in their company because it is secure very much.

Full form of DHCP "Dynamic Host Configuration Protocol. DHCP server assigns IP addresses and other network configuration information like subnet mask, broadcast address, etc to computers on a network. The DHCP assignments are the following.

Lease Request: Client broadcasts their request to DHCP server with a source address of 0.0.0.0 and a destination address of 255.255.255.255.
IP lease offer: DHCP server replies with an IP address, subnet mask, network gateway, name of the domain, name servers, duration of the lease and the IP address of the DHCP server.

Lease Selection: Client receives offer and broadcasts to al DHCP servers that will accept given offer so that other DHCP server need not make an offer.

The DHCP server then sends an ack to the client. The client is configured to use TCP/IP. Lease Renewal: When half of the lease time has expired, the client will issue a new request to the DHCP server.

Installation of DHCP server: First of all while install the RedHat Linux enterprise version server be careful about the ports and the services must be turned on. To create DHCP server in Linux first download DHCP RPM package and install with "rpm-ivh" command. Where I have done it there I have create YUM server, so easily I have download and install it by YUM (yum install dhcp version). DHCP package will locate in /usr/share/doc/at Linux file system. I copied the DHCP's files from /usr/share/doc/ to /etc/dhcpd.conf.. Then I started to configure the dhcpd.conf file to route the DHCP server in there local network. I have open the configuration file with "vi" command. Then commented out the lines from "default gateway to option netbios" because system don't read the commented lines. After that I set the range of IP address in dynamic- bootp of their local assumption of system. I have change the "next-server" with the dhcp server name and have also change the fixed address with the dhcp server IP address (end range of dynamic IP). It is very easy job to configure DHCP server. After configure the .conf file of dhcp just turn on the service with "chkconfig" command and restart the dhcp service. After that entire job I reboot the system. And after rebooting of server I turned on the other client system. While startup the client system without static IP address all of those picked up IP from dhcp server and going on successfully. I have prefer the command line mode to do the total job.
The DHCP server configure file is following:

ddns-update-style interim
ignore client-updates

subnet 192.168.1.0 netmask 255.255.255.0 {
# The range of IP addresses the server
# will issue to DHCP enabled PC clients
# booting up on the network

range 192.168.1.201 192.168.1.220;
# Set the amount of time in seconds that
# a client may keep the IP address

default-lease-time 86400;
max-lease-time 86400;

# Set the default gateway to be used by
# the PC clients

option routers 192.168.1.1;
# Don't forward DHCP requests from this
# NIC interface to any other NIC
# interfaces

option ip-forwarding off;

# Set the broadcast address and subnet mask
# to be used by the DHCP clients

option broadcast-address 192.168.1.255;
option subnet-mask 255.255.255.0;

# Set the NTP server to be used by the
# DHCP clients

option ntp-servers 192.168.1.100;

# Set the DNS server to be used by the
# DHCP clients

option domain-name-servers 192.168.1.100;

# If you specify a WINS server for your Windows clients,
# you need to include the following option in the dhcpd.conf file:

option netbios-name-servers 192.168.1.100;

# You can also assign specific IP addresses based on the clients'
# ethernet MAC address as follows (Host's name is "laser-printer":

host laser-printer {
hardware ethernet 08:00:2b:4c:59:23;
fixed-address 192.168.1.222;
}
}
#
# List an unused interface here
#
subnet 192.168.2.0 netmask 255.255.255.0 {
}

on Mar 17, 2011 | PC Desktops

2 Answers

Network card not detecting in RHEL4 & 5


The solution proposed by user 'Solutions58' seems to be about windows box since he is talking about 'Device Manager'
RHEL4 or 5 detect compatible NIC cards during boot up process automatically. Sometimes NIC may be detected but may not work properly due to lack of proper driver (a.k.a Module - in Linux culture).
Do this -
1. First find out from HP's web site if NIC for your model has Linux support. You can also use Google to find appropriate driver for your NIC. If yes then you need to follow instructions that are provided in the INSATLL file that comes bundled with the driver.
2. Otherwise buy a $10 NIC card which has Linux support. Disable your onboard NIC through your computer's BIOS and boot it. Linux should detect your NIC right away.
3. Following command can help you in your quest
As root
# dmesg | grep eth (Will show your detected NIC)
# service network status (Will also show configured & active devices)
# ifconfig -a (Will also show your network devices and related info)
# system-config-network (will let you configure your NIC via GUI)
(This would be your best choice)
# system-config-newtowk-tui (Will give you a text base interface to configure your NIC)

Aug 05, 2009 | HP PC Desktops

2 Answers

How to found the Dirvers for the intel Desktop Boards D945GCR


visit intel site and search the drivers there

Jun 03, 2009 | Dell PC Desktops

1 Answer

NIC driver installation in Linux Enterprise Server


Most drivers I get are on driverguide.com but you need to register and it is for free

Jan 22, 2009 | PC Desktops

1 Answer

How to found the Dirvers for the intel Desktop Boards D945GCR


try these links:
http://wiki.onmac.net/index.php/Users/Drivers/Mac_Mini_DVI
http://www.driversdown.com/drivers/Dell-Studio-1735-Notebook-Intel-GM965-Express-Chipset-Driver-v.7.14.10.1437-Windows-Vista-32-bit_81891.shtml

Dec 24, 2008 | Intel Celeron -D 2.26Ghz Computer System...

3 Answers

Problem installation of red hat linux in acer branded system


which driver installation menu? You need to be more specific.

Nov 14, 2008 | PC Desktops

3 Answers

Need windows 2000 server nic driver


Hello sir,

Try this link for Windows 2000 server.

http://www.opendrivers.com/driver/212753/3com-etherlink-server-nic-3c985-3c985b-driver-
windows-2000-free-download.html

Best of Luck

Don't forget to rate the solution.
thanks

Mar 11, 2008 | HP Compaq d220M (829160054797) PC Desktop

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...