Error 5012 in canon mg3150 - Office Equipment & Supplies

The error code seems to indicate a problem with the print head. Below is a link to help you trouble shoot the issue


Canon PIXMA MG3150

Take a look here https://printerthinker.com/canon-pixma-mg3150/

It includes all error codes for this model

Hello, this is from the service manual
22 times Flatbed motor error
[5012] (1) Flatbed motor flexible cable connection:
-> Re-connect the cable.
(2) If the error still occurs:
-> Replace the part(s) listed on the right (under
"Parts to be replaced if the listed solutions are
not effective").
-Scanner unit with the flatbed motor cable

The error number means a certain problem. You will have to reboot the machine. If the error code is still there, you will have to fix the problem before the code will go away.

Please check the cartridges.Re install the cartridges properly and try.
if ink is dried refill the ink.some times will happen to new printers also.if waranty is there cary to nearest service point.

Printer error 5012 INFOAZKA

try tthis
Press and hold the Stop/Reset button until the error clears.
If your printer doesn't have a Stop/Resume button, use the Cancel button. Hold the button - until the Alarm LED stops flashing,
or until the error message disappears. This takes 6-7 seconds.
Note: You will have to repeat the whole process with every cartridge that indicates empty (in the ink monitor).
Good Luck
Thanks

canon mg5250 error code 5012...what

5012

From the service manual, both errors relate to the scanner unit:

[5012] An error occurred in the scanner FB motor.
(1) Cable connection (2) Part replacement: - Scanner unit

[5050] The AFE was faulty.
(1) Cable connection (2) Part replacement: - Scanner unit

I don't know if the following YouTube video will help, but you could watch and see if it applies to your printer.

Error 5011 and 5012 Printer Canon MG 2570 MP 237 MP258