Question about Whirlpool Washing Machines
Please can you provide me with the exploded view as I moved and my documents for the machine got lost. 3XLA87W72A 3361752 Heavy duty/super capacity. 7 Cycle/2 speed. The machine is about 14 years old but I maintain it in prime condition.
I can't find an exploded view but i found something even better:
Let me know.
Posted on Jan 11, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Fill Cycle Won't Stop
heres hteaprt numbr for both the water level switch and the connecting tube, before i replace he switch make sure the tube is connected to rear of tub nad isnot cracked or kinked, and connected correctly to the switch for that matter. a hole in the tube would hamper he switches ability to sense when unit is full
3356466 water level switch,3347780 pressure switch tube
Posted on Mar 16, 2008
Coupling is broken that connects motor to transmission. Replace it. Please contact me if you need further help or leave feedback if appropriate as that is how I get paid. Thanks for letting me help you!
Posted on Nov 30, 2008
SOURCE: washing machine won't spin dry
If this is a top load clothes washer, almost all units will not spin if the door is open during the cycle time when it should be spinning. If the door is closed, check if the door safety interlock is broken (on most washers, you will see a pin on the door pressing into a little depression)
If these things check out, you probably have a failed transmission deep inside the clothes washer. Fixing that is non-trivial.
Posted on Aug 20, 2009
load lite, and if the problem still is there let run empty a couple of times, if there is still a problem it is off track and a professional needs to go inside of it you can do it yourself but not recommended so call a pro!!!
Posted on Apr 21, 2010
If your TOP LOADING Whirlpool manufactured washer (Kenmore) is leaking, the following link explains how to remove the exterior washer case in order to accurately inspect the washer interior components for the source of your leak:
If the leak is more like a constant drip, a common source of leaks with Whirlpool manufactured top loaders is a leaking drain pump. These pumps are not serviceable and if damaged, must be replaced. The following link explains how:
Don't forget to check all drain hose connections under the washer and the center tub seal.
Replacement parts (if required) can be purchased at any of the following websites:
Prices vary between sites, so shop and compare. The first three sites listed also have helpful exploded view parts illustrations to assist you with locating and properly identifying the parts you may need.
If you have any questions, please post back with a complete MODEL NUMBER and let me know. I hope this helps you.
Posted on Aug 12, 2010
Tips for a great answer:
Jan 14, 2010 | Washing Machines
Jan 04, 2010 | Kenmore 24032\24036 Top Load Washer
Aug 29, 2009 | Whirlpool LSB6200PQ Top Load Washer
Jul 26, 2009 | Kenmore 15864/15862 Top Load Washer
Jul 20, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...
Apr 13, 2009 | KitchenAid KHMS155LSS 1000 Watts Microwave...
Mar 03, 2009 | Maytag Washing Machines
Jan 31, 2009 | Kenmore 24032\24036 Top Load Washer
Jun 17, 2008 | Maytag Performa PAV2200
419 people viewed this question
Usually answered in minutes!