Question about Epson C11CA67201 B-510dn Business Inkjet Printer

Open Question

Epson B-510DN stops printing midway

Halfway through print job the printer stops. Both the lights start blinking. There is a message displayed - general error. Turn off the printer, take out the paper and turn the printer on again. Doing so does not work. I have reinstalled the printer driver also.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

techman
  • 3130 Answers

SOURCE: Print head jam

Iv'e seen these problems a 100000000 times with this printer and I found a little article you may wanna read before going farther with this machine!!!! Go to http://.i18nguy.com

Posted on Apr 23, 2006

Tirzo
  • 94 Answers

SOURCE: Foreign object

It appears as though the printer hardware itself is malfunctioning and will require service.

Posted on Jun 11, 2008

jacklee366
  • 541 Answers

SOURCE: Epson R320 "General Error" message - unable to clear

try downloading the ssc this will reset your printer

Posted on Mar 03, 2009

aicaxz
  • 511 Answers

SOURCE: both red lights on my printer are blinking

Blinking wit general error message : head carriage error. It cause by head cannot move to parking position or chip at ink tank not good connected. Try to use another chip. Just turn off printer for a moment for clearing epprom.

Posted on Jun 10, 2009

aicaxz
  • 511 Answers

SOURCE: epson r230 general error

Blink alternately or not? If alternately, the message is not "general error". but "service required" It's true to reset waste ink counter. But, i think it's not service required. when trun on printer ready? But when start to print red lights blink at same time? Problem with chip at ink tank. Check connector at chip and at head carriage. It's may be dirty, and not good connection. try to use another chip.

Posted on Jun 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Epson L365 printer has starts printing then stops halfway and sends a message that the printer has failed to print the document. I tried reinstalling the software but it has not helped. Any ideas?


Hi.
I have this error soo many times with Epsom, so I got a propper HP printer...
But, you can try uninstalling all softwhere for it, THEN reinstall it.
I did this 5 times, it worked fine for a short while, then, same dam fault.
Give it up mate.

Oct 18, 2016 | Epson Office Equipment & Supplies

3 Answers

Print queue stops document and will not resume


Hi,

Clearing the Print Queue in Windows:

Open the Print Queue
  • Windows 98 - click Start, Settings, Printers
  • Windows XP - click Start, Printers and Faxes
    or click Start, Control Panel, Printers and Faxes
  • Windows Vista - Start, Control Panel, Hardware and Sound, Printers
Double-click to open the appropriate printer's queue. The Print dialog box will open. Here you will see a list of all of the jobs waiting to print, along with the status of each job. The first print job is at the top of the list.
To cancel a document in the list, right-click it and select Cancel Printing. Most often, it is better to cancel all of the jobs and then resend the documents to the printer.
Cancel All Documents
  • Windows 98 - click Printer on the menu, select “Purge Print Documents”
  • Windows XP - click Printer on the menu, select “Cancel All Documents”
  • Windows Vista - click Printer on the menu, select “Cancel All Documents”
Please note that you must have Administrative rights in Windows XP and Vista to cancel print jobs. If you are the only user, you automatically have administrative rights. If you are on a multi-user computer, you must be an administrator. If are on a network and get a message saying that you do not have Administrative rights, find someone who does.
Under normal circumstances, printing documents are cancelled and will disappear from the queue. If one or more do not disappear, shutdown the computer and restart. When shutting down, you may get a message warning you that your print jobs will be lost if you continue. Tell Windows to shutdown anyway. When you restart, Windows may tell you that you have print jobs waiting. Tell Windows to delete them.
Before you resume work, open the Print Queue from the Start menu. You should find the queue empty. If you are using Windows XP or Windows Vista and the queue is not empty, you will be unable to print. Before trashing your computer, you can try to clear the queue using a secret Windows command.
Click Start, Run, and type “Net Stop Spooler” (without the quotes). Then press Enter. Shutdown the computer and restart. The print jobs should be removed. If they are not, shut down the computer again, take a deep breath, and then go for a long walk. The queue should be clear when you return. Note that you must restart the computer for your printers to resume normal operation.


Goodluck,
Please don't forget to rate the solution.

Apr 01, 2008 | Epson Stylus Photo R1800 InkJet Printer

2 Answers

Error code 0xf3?


PDF]Repairing EPSON B-510DN Error 0xF2 or 0xF3

https://ifixit-guide-pdfs.s3.amazonaws.com/guide_11767_en.pdf
Stalled printer for error 0xF2 or 0xF3. The error compare when there are some problem with encoder with roller to feed paper. Repairing EPSON B-510DN Error ...

Oct 19, 2015 | Epson WorkForce WF-3640 Wireless Color...

1 Answer

Z615 Error message,Printing Failure,current print job canceled,print status 15% completed,shows cartridge info.Power light blinks on-off,have reinstalled driver,rebooted windows. Widows XP


It could be the Print Spooler service on your computer. Make sure the service is running. - Browse to Start -> Run... and type in "NET STOP SPOOLER" (this will stop the print spooler service)


- type in "NET START SPOOLER" (this will restart the print spooler service)
Try to print again.

May 24, 2011 | Lexmark Z615 InkJet Printer

1 Answer

Printer error


Hi,

Here a few common problems that your Epson printer and ink cartridge can suffer from.

Improper Installation of Cartridges

A common Epson printer and ink cartridge problem! If you have changed the ink cartridges then you might just receive this error message. The message might state that the cartridge is not installed correctly in the printers. In such cases, re-install the cartridge in the correct manner. If the problem persists then it is advisable that you replace the cartridge as it might be defective. If you still get the same error message on installation of the replacement cartridge then its time that you clean the print head. You could do this yourself or could take it to a repair facility.

Printing Failure

Failure to print documents is yet another common problem with respect to Epson printers. The print heads of Epson printers are sensitive and this sensitiveness is the culprit behind such problems. If the print head is clogged or blocked you will have to unclog or unblock them. This can be done by using a special fluid that is available for just this purpose only. This fluid flushes the print head, and your printer is once again ready to print.

Communication Error

'Communication Problems' are yet another one of the common problems surrounding Epson printers. Once you give the print command you might be shown the message that there is a communication error between the printer and the computer. This means that there is the occurrence of a minor problem. One of the reasons for this problem could be the inappropriate selection of printers from the print options menu. Cable connections should also be checked. Another solution could be the re-installation of the driver of the printer.

Print Jobs that are Slow or Incomplete

These are problems that occur during an ongoing process. The printing might stop midway and then start again after some time. At times, the printing process will repeat itself several times and then finish printing the page. There are times when the page will finish printing, but you will find that it is an incomplete print. More often than not, this is not a printer related problem.

What might have happened is that the driver might have corrupted or a virus might have infected the computer; or a spyware might be affecting the working of the printing process. If such a problem occurs, the best solution would be to scan the computer for viruses and spyware. As can be seen these common Epson printers and Epson ink cartridge problems can be sorted out quite easily.



hope it helps..

Thanks for using fixya...

Dec 04, 2010 | Epson Office Equipment & Supplies

1 Answer

Solid orange light and blinking green lights


To check the light Pattern of your printer

Click on Light and Error HP Laser jet 1012 Printer

Check the error details from the above link

Condition of the printer Action/Description Ready

The printer is ready to print. No action is necessary. Processing

The printer is receiving or processing data. Wait for the job to print. Processing...(job name) Ready LED is blinking.

This message is displayed while the printer is processing a current job, but has not begun to pick pages. Processing...(job name) From Tray XX Ready LED is blinking.

This message comes up for any job, once the printer starts to pick paper. Manual Feed or Continuable Error

The printer is attempting to Manual feed, media is not loaded in the paper tray, media loaded is the wrong size or type. Verify that the correct media is loaded.

Press and release the GO button to continue printing. Out of memory

The printer is out of memory. The page you are printing might be too complex for the printers memory capacity. Try lowering the resolution. See Understanding print quality settings for more information. Door open, media out, no print cartridge, or media jam

The printer is in an error state that requires operator intervention or help. Check the following:
  • The print cartridge door is completely closed.
  • Media is loaded.
  • The print cartridge is correctly installed in the printer.
  • There is no media jam.
Printer initialization

A printer initialization is taking place. No action is necessary. Fatal error

All lights are on.
  • Unplug the printer for 30 minutes, and then plug it back in.
  • If the printer still has an error, contact HP Support.
All lights are off.
  • Verify that the printer is turned on.
  • Make sure that there is power.
  • Unplug both ends of the power cord, and plug them back in.
Job Cancel

All the LEDs cycle. Canceling...(job name)

The Job Cancel button was pressed and the job is aborted. Power ON

All the LEDs cycle. Checking Paper Path and Checking Printer

This only occurs at power up. Cleaning mode/Engine test

A cleaning page or engine test page is printing.

All the LEDs cycle. Cleaning Page prints

Wait until the cleaning page is finished printing and the printer is in Ready mode. This could take up to two minutes.

Wait until the engine test page is finished printing and the printer is in Ready mode. Clearing Event Log

All the LEDs cycle.

This will happen automatically during an NVRAM Init and a cold reset. No message will be displayed. No Action is Necessary. Power On

Initializing

This occurs when the product is powered on and coming out of EDOS. No Action is Necessary.



Jan 03, 2010 | HP LaserJet 1012 Printer

1 Answer

My Epson is printing pages in code and will not stop and the green light is blinking and the red is staying on. We put in new ink cartridges today.


zark4, The green light flashing means you have print jobs waiting to be printed. Don't Turn Off The Printer When The Green Light Is Flashing ! If you have paper in the printer, the red light means you have an empty ink cartridge. Because both things are happening at the same time, here's what you need to do. First click start. Click printers and faxes. Double left click the Epson C-60 Icon. Left click Printer and click Cancel all documents and click yes, then exit. Remove and reinsert your new ink cartridges to make sure they are seated correctly. After you have done this and the printer finishes the automatic charging of the ink cartridges, the lights should be back to normal. Green light on.

Oct 22, 2009 | Epson Stylus C60 InkJet Printer

3 Answers

Epson r230 general error


Blink alternately or not? If alternately, the message is not "general error". but "service required" It's true to reset waste ink counter. But, i think it's not service required. when trun on printer ready? But when start to print red lights blink at same time? Problem with chip at ink tank. Check connector at chip and at head carriage. It's may be dirty, and not good connection. try to use another chip.

Jun 22, 2009 | Epson Stylus C86 InkJet Printer

2 Answers

Job stopped!


hey wildd, Try unplugging the printer from the electrical source for "several" minutes. Shutdown the computer too. Turn on the printer, then turn on the computer. If that doesn't work go the whole mile. Uninstall all printers and software. download the latest drivers from Epson. http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=23952&infoType=Overview This link is to the epson site and your machine. Download the drivers from here. Have you had any paper jams lately? Make sure there aren't any pieces of paper stuck or any other debris. How about the print properties, or open print jobs? what does it show when the job stops. Let me know what happens. Good Luck, Tim

Mar 13, 2007 | Epson Stylus C64 InkJet Printer

Not finding what you are looking for?
Epson C11CA67201 B-510dn Business Inkjet Printer Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...