Nasir my mobile was in locked condition, and now my touch is not working..not even a single tap is working on mobile screen. i did soft as well as hard reset but every time the unlock screen appears after boot process. i can only press the unlock button on screen from the left button on mobile and cant press Unlock again because it is on the screen. I believe in this situation, only two options can be used, One is to attach a Keyboard, or to access the mobile screen through any software on PC.

Bro

please see a good service center before all things go down.

Let me know the condition

Regards
Marshal
Dhaka, Bangladesh
bdman2010@hotmail.com

Well I have to admit this is a common problem with these silly type of touch screens, mobile phones get the same too, and it is mostly due to the touch pads drying out from heat, the old XDA Mobile phones had the same thing happen, the older my phone got the harder I had to press it.
Try cleaning the touch screen with a damp cloth, just tap water moist on cloth, then rub off with another dry soft cloth, but do not press too hard ok?

how can i hard reset

Try calibrating the device again.To recalibrate:

Tap Start >> Settings. Go to System tab and tap on Screen. Now select to Align/Calibrate screen from there and follow the instructions. Tap Ok after the calibration is complete. Soft reset the mobile and then check again,

Try this. Touch Keypad simulates a wireless phone keypad on the touch screen to allow you to enter text, numbers, and symbols just as if you were using a wireless phone keypad. Touch Keyboard simulates a 20-key QWERTY (typewriter) keyboard on the touch screen to allow you to enter text, numbers, and symbols similar to the way you would using a QWERTY keyboard. To use Touch Keypad or Touch Keyboard:  In a program, tap the Input Selector arrow, and then tap Touch Keypad or Touch Keyboard. To type lowercase letters, tap the keys on the dial pad or keyboard. To type a single uppercase letter, tap the Shift key and then tap the corresponding key. To type all uppercase letters, tap the Shift key twice. To change back to all lowercase letters, tap again. To enter a space after the word, tap the Space key. To start a new line, tap the Enter key. To backspace and delete a single character in any input mode, press the Back key. To open the Symbol pad, tap the Symbol key. To change the input mode:  Tap the Input mode key to switch to a different input mode: XT9 (predictive), Multitap (abc), or Numeric (123).

Hope this helps, let me know if this works or if I can help you with anything else.
JimmyC

Phone Lock Reset Wizard Mda Vario T Mobile

instructions for
hard resetting a wizard, which is resetting the phone
thus the phone lock as well.

Dead easy really

1. Press the Comm Manager button (top left)
together with the Voice Activation button (top right)
for 2 seconds.

2. Keep holding the 2 buttons above and press the soft reset
(middle right little hole) with the stylus for another 2 seconds.

3. When the black screen appears it'll ask you to click Send

That's it All done !!

The wizard's going to reboot and reset himself.
Good Luck.

Just press the soft reset button at the bottom of the phone with the stylus. Make sure you use the stylus because I ended up damaging my mic with a paper clip.

LCD is inside the front glass that has logo of htc

the upper glass is called touch panel or digitizer it is working as u say but lcd is broken u can see visible cracks on it and it may partially display or not at all then ur lcd is broken by pressure or impact u need to get it replaced around like 100-150 dollars depends on the model and size of the lcd screen

get it serviced?
my guess, damaged screen.
most shops would touch any Ipaq.
why not ask on a real HP forum?
my guess, the only hope for old Ipaq

http://h30434.www3.hp.com/

my mobile was in locked condition, and now my touch is not working..not even a single tap is working on mobile screen. i did soft as well as hard reset but every time the unlock screen appears after boot process. i can only press the unlock button on screen from the left button on mobile and cant press Unlock again because it is on the screen.
I believe in this situation, only two options can be used, One is to attach a Keyboard, or to access the mobile screen through any software on PC.