Question about Dell OptiPlex™ GX270 PC Desktop

1 Answer

Epson all in 1 computer 730-d2025

Hi guys,
I have an epson all in one computer bought second hand without a remote contro and has been working fine, the model as far as i can make out is 730-d2025

This unit is now giving a problem, after switching off it wont come on again and goes i belive into standby mod, the cpu fan is runing so is the power supply but no picture.

If i leave it running for some considerable time it does me a favor and comes on everything is normal until switch off. any ideas?

one more thing would it be possible to use a universal remote control with thi computer.

thanks David Bangkok

Posted by on

  • david delaine Jan 22, 2009

    Well I thougt my prayes were answerd but no such luck, but this computer will come on by its own free will, strange beasty,

    when its in this standby mode or sleep mode i have 2 lights on the front panel 2nd one in from the left, the symbol above looks like some sought of propeller, never seen that b4 and the 4th from the left wich is the power on led turnes from yellow to green when all is well and the prop one goes out,

    anyway i thank u for your time and trouble for your post. do you know i cant find an epson technical site where i could pose the problem. thanks again. David


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 70 Answers

When it's in sleep mode all you should need to do to bring it out is hit enter on your keyboard.

Posted on Jan 22, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Dell XPS 730 no video, not bios, fan running hard

Fist touching anything on the motherboard without a anti-static strap can kill the motherboard.

The fan running at full speed is no big deal. If you took out the video card
how do you expect to see anything on the monitor.

You need to plug the monitor you have into a working computer, this will rule out the monitor. If the monitor died, you did all this for nothing.

Now unless the motherboard has onboard video you have to put the card back in, if it does have onboard, even without the drivers installed you still see the post, because windows will let it run at post, and with the video card, it will still show post without drivers.

Do this,check monitor, try both ports and post back and tell us whats
going on.

Feb 10, 2010 | Dell XPS 730 Desktop Computer

1 Answer

Need help with epson pos

its not the relephone plug the 24 v wires sound about right i believe the telephone plug would be for credit/debit card sales via a built in modem and magnetic card reader hook up the wires first by stripping them back and electrical taping them together put drawer in and plug it in should work if not switch wires try again once it works either solder or use a **** conector or wire nut and tape to ensure it doesnt ground out

May 21, 2009 | Epson PC Desktops

1 Answer

Dell xps 730 19 in 1 memory card reader and bluetooth not working

Kindly un-install both the drivers for blue-tooth and wireless card from your computer. Just right click on each driver in the device manager select remove or un-install. Restart your computer and re-download the drivers from the dell support site.

Note: dell support site would only contain drivers , for your xps system h/w that came from dell. if you have attached the wireless and blue-tooth later , you might need to download them from manufacturer website


Feb 15, 2009 | Dell XPS 730 Desktop Computer

1 Answer

Stays in standby or sleep mode afer switch off

Problem solved. inside this computer there are a set of dip switches a block of 4 top middle of circuit board, 1 up 3down, what i did was to switch all switches to the the up posistion, and not having a clue what would happen.

Ureka the computer came on, if you switch of and switch on again comp becomes operative at once, depending how long you leave it off the longer it takes to come on.

Example if it is switched off say overnight it will take about 2.5 mins to come on, it seem that the comp is doing some sought of self checking. I could play around with those dip switches but as it is now working and i understand what is happening (I think) i will leave well alone.

David Delaine Bangkok Thailand

Jan 22, 2009 | PC Desktops

1 Answer


plz visit the manufacture (mother board or the if branded then brands) website

May 24, 2008 | E-Machines eMachines Refurbished EMA...

1 Answer

I am unable to find a 12volt computer power cord for a Pro View Monitor I purchased second hand. I even bought a one size fits all deal that did not work. Can you help me.

dear cate

you buying this without a power adapter

but you can buy this separate the type is
Proview SA-769 11 TO 14 Volt AC Adapter
it's price about $ 54 and mybe you can find the second hand about $ 20



Mar 15, 2008 | PC Desktops

2 Answers

Can not print

Windows 98 you should istall the driver and test print. If nothing working try changing the cable and test print.

Best Regards

Feb 18, 2008 | HP Compaq Business Desktop dx2200 - P4 524...

Not finding what you are looking for?
Dell OptiPlex™ GX270 PC Desktop Logo

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell PC Desktops Experts


Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Dell PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides