Wii / B button / Classic Controller / Player 1 / not working
I have two Classic Controllers and in both the B button is not working with any Remote Control in "1 Player" mode. However in 2 player mode, the one that is plugged to Remote #2 (no matter which one) the B button starts to work.It is not a problem with the Classic Controllers or the Remotes; I have tried different combination and all present the same problem: The B button of Classic Controller does not work for Player 1; for player 2 it does. I verified this with Super Mario Bros and Street Fighter... player 2 always won.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You said when if the game starts the controller goes off.try holding the sync button on the wii console for 15-20 seconds then resync all controllers.If it doesn't work try this:Start the donkey kong game then press the home button then go to the wii remote settings it has an icon of a remote then after you enter it find the reconnect then press 1-2 simultaneously to select who is the first player.If it doesn't work try resynchronizing it as the first controller.Hope this helps.
I had this problem and it was down to be, me plugging the motion plus into the wrong controller. I have one control with intergrated motion plus and the other uses a plug on motion plus. I accidently plugged the plug on one into the already intergrated control leaving the one control with nothing. Hence that control could not be recognised. Hope this helps
Had the same problem last night.... Turn off the wii system by unplugging , wait a couple of seconds and plug back in. Next, the front of the wii has a pocket that opens, there is a red button. Put the disc to mario kart in the wii once you see the federal regs push and hold the red button on the wii for 15 seconds then once this 15 seconds is up with the controllers battery case open push the red button to the original controller. All of lights will flash and then stop. Push the red button on the wii console again just once. Then push the red button on the second remote wait till all lights stop flashing push the red button on the console and now they should be married to the wii system. Hope this helps----do you know how to get the volume? We don't have any volume
re-sync the controllers so that they become #1 and #2 you can do this by following these steps
Standard Mode Synchronization
Note: Make sure you have placed batteries in the Wii Remote (how to).
Press the Power button on the Wii console to turn it on.
Open the SD Card Slot cover on the front of the Wii console. Remove the battery cover on the back of the Wii Remote you wish to sync up.
Press and release the SYNC button on the inside of the SD Card compartment on the console. Press and release the SYNC button just below the batteries on the Wii Remote.
When the Player LED blinking stops, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).
This procedure must be followed for each additional Wii Remote added to your system.