- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The problem sound`s like it could be a fuse, but first you`d need to verify the model number. ( past experience dictates I can`t count on the one at the post heading, sorry. )
If it is indeed an Asko the fuses will be located at the back above where the power cord exit`s the washer. Unplug the washer either from the wall or the dryer ( or unplug the dryer if connected to the dryer, either way ) With a flat screwdriver fitted in the slot of the fuse hub, turn it a quarter turn counter clockwise an it should drop out...though it may need to be pulled out if it`s stuck in the holder part. Replace with a 15amp "slow blow" fuse if blown ( the only difference is the slow blow are filled with sand and aren`t transparent glass tubes but rather gray or white in color )
I`ll assist you further if need be once I see a model number. Hope this was helpful, if so please take a moment to rate it. Thank you and good luck.