Question about D-Link Computers & Internet

1 Answer

How to reset my password

I cannot access on d link rounter

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • D-Link Master
  • 32,281 Answers

If the default password on the D-Link has been changed then -
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ON until the LEDs flash at the time the release the RESET button. (firmware version was 3.00, and upgraded to 3.05) Connect a LAN cable from the D-Link to your laptop/computer's LAN port, open the browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings. (WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access). Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Posted on Jan 11, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Google com


most d-links are either

username - admin
pasword - nothing (as in leave it blank)
or
username - admin
password - admin

if either of those don't work you'll have to factory reset it. To do this you have to pull the power, hold in the reset button on the back with a paperclip or pencil head, plug it back in and wait for 30 to 60 seconds while still holding in the reset button. it should start booting, reset (then you can let go of the button) and reboot to factory settings (meaning the settings it had straight out of the box).

Jul 13, 2014 | Computers & Internet

1 Answer

How to set the password for security of rounter WRT54G


To set the password in this router you will need to log into it first. open your browser and in the address bar type in the ip address for you router. It will ask for the current user name and password. Once you have logged into the router go to the administration page. There you will see how to reset the password for administration of your router. Here is a link of what that page looks like http://www.techarp.com/review/Linksys/WRT54G/setup_07a.gif. If you are trying to setup wireless security go to this link for a step by step guide http://vectrosecurity.com/content/view/48/26/

Jul 22, 2011 | Computers & Internet

1 Answer

I bought linksy wireless rounter off my sister i cant get conected the router is asking for a password she forgot it how can i reset it to use h my hughes net modem


Press and hold the reset button on the back of the router for 30 seconds. You'll now have reset the WRT54G to factory settings.
1. Now connect to your router. 2. Log in to your router by typing in 192.168.1.1 in your browser. 3. You'll be asked for a username and password. Leave the user blank and type in admin as password. 4. Now secure your router again.

May 08, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

We decided to restart the rounter because the speed of our internet wasn't very good. However when we turned the rounter back on our wireless wasn't working anymore, and now the whole thing isn't working....


In resetting router it is like setting it back to its factory default. what you need to do is just access the GUI where you can set up the Username and password. Once done with it you may be able to connect to the internet.

Apr 03, 2011 | Zyxel (91-004-361002) Wireless Router

1 Answer

The belkin rounter of my dad's laptop was installed without password setting. i tried to set it up on 192.168.2.1 configuration page. i was notified that the rounter will restart again itself...thereafter...


If you can still remember the password that you entered on the configuration page, follow the steps below:
1. In the lower right corner of your screen (near the time and date), right click on the wireless network connection icon, then select view available wireless networks. Or, if your wireless adapter has its own wireless utility, you should see that in the lower right corner of your screen.
2. You should see the router's wireless network name (SSID). By default, the SSID is "belkin54g". Select the SSID and it will prompt you for the network key.
3. The network key is the password that you entered on the router configuration page.

If you cannot remember the password that you entered, follow the steps below.
a. Connect your computer to the router using an ethernet cable.
b. Access the setup page by typing 192.168.2.1 in the address bar.
c. Go to Wireless -> Security. Copy the network key.
d. Then follow steps 1-4 above.

For the MAC computer:
1. From the Airport menu, select the SSID.
4. When asked for a password, enter the network key that you entered on the router.

I hope this helps!

Jun 13, 2010 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

How to set a password for my wifi netgear wireless-G Router?


try 1234 as the password. failing that go to this page for instructions on how to reset the password. http://kb.netgear.com/app/answers/detail/a_id/9665

there is even a video on how to do it but be aware that this will reset your rounter to factory (default) settings.

robert

May 11, 2010 | NetGear WGR614 Wireless Router

1 Answer

HTTP/1.0 401 Authorization Required


you need the password for the router. If you do not have one, then hold the reset button till the lights flash and then try accessing it with admin and admin or admin and nothing in the password spot

Jul 11, 2009 | Computers & Internet

1 Answer

Network security passcode


Then you will need to reset the rounter. ther shuld be a small button or whole that you push to rest it. You will need to change your default password after reseting it.

Jan 03, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

How can i change my rounter password? i don't know the ID and password~? help~~>
if you dont know it, then the only way to remove it is to reset it and everything will go back the factory defaults, so you will need to reconfigure it if you will reset the device.

Jul 07, 2008 | Actiontec GT704WG Wireless Router...

2 Answers

CANNOT CONNECT TO INTERNET


in the installation manual you have a url you can type in...its something like 192.428.111.1...ect about 10-12 numbers...type this number in the internet browser search window. this will tell you first if you have access to the internet. you should get the settings windows for your router. there you can make adjustments as needed for your rounter unit.once confirmed.

if you are having access to the wireless network you set up the password you set in is obviously incorrect when it was set up. first check the light on the front of the wireless router it should have various light on ..such as power,,usb...dsl...and internet..with the internet light flashing... as a precaution please do a repair connection on your internet access point on the computer ur using..right click the wireless icon at the bottom of your screen if ur using xp..sometimes this repair will be just enough to clear up issues.and allow access.

if this continues...you may need to reinstall the unit...there is generally a reset button (very small) on the underside of ur wireless unit and take the appropriate steps..

gl
K.

Dec 30, 2007 | D-Link 802.11g Wireless Router WBR-1310...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...