I want to install my logitech quickcam e3560

Hi

Yes you can. Logitech has the software on their downloads section. Here is the link to the page. http://www.logitech.com/index.cfm/support_downloads/&cl=us,en

If you need further assistance, let me know.
Thanks,
Ekse

sotware for cameras dont work for apple unless in UVC mode means plug and play. here is a list of cameras compatiable to apple computers.

amera Name P/N QuickCam E3500/E3560 860-000095 QuickCam Ultra Vision SE 860-000023 QuickCam Ultra Vision 861238 QuickCam Orbit/Sphere MP 861305 QuickCam Fusion 861304 QuickCam Pro 5000 861306 QuickCam Pro 9000 861464 QuickCam Pro for Notebooks 860-000026 QuickCam for Notebooks Pro 861303 QuickCam Communicate MP (S5500) 860-000106 QuickCam Communicate Deluxe (S7500) 860-000107 QuickCam Communicate Deluxe 861235 QuickCam Deluxe for Notebooks 860-000009 QuickCam Vision Pro for Mac 860-000143
QuickCam Orbit AF 860-000063

Skype you have to go to tools and then click on options and select audio settings and make sure your audio card is selected for both the mike and speakers. Then go to Video Setting and if a black box is there wait for the camera to show. If it does, then at the bottom and save. Should work okay then. Hope this helps. Bud

Hi Erin,

This is the driver for QuickCam® E3500/E3560, called QuickCam 11.8, it works for both:

http://www.soft82.com/download/windows/logitech-quickcam/


Hope this helps :)

Chris (ziraffa)

Normal 0 Go to Control Panel and Click on Sounds, Click on Audio, then Click on the Microphone. Then Click on the drop down and select Camera Microphone.
Click OK and it should work.
Hope this helps. Bud

If your using a laptop and it has a built in microphone, it could be affected by the external microphone in the camera.
if this is the case,
Normal 0 Because you have the built in mike, in the laptop and the one in the camera working at the same time you will get distortion and feedback.
Go to Control Panel and Click on Device Manager. Then go down to Imaging Devices and click on the + and right click and then click on DISABLE. Then click OK
Or you could disable the Laptop Microphone but its more complicated to achieve.
Hope this helps. Bud

It sounds like your camera is not compatible with Mac OS. The disc may only have the software for Windows. Go to Logitech web site and see if you can find the software for Mac.

Try this link and download version 11.5 onto your hard drive, by installing from hard drive the invalid drive should be bypassed.

Install the software before attaching web cam.

Which cameras are compatible with MSN 6.0?
Below is a list of cameras that are compatible with MSN 6.0:
ClickSmart™ 820
ClickSmart™ 420
QuickCam® Cordless
QuickCam® Messenger
QuickCam® for Notebooks Pro
QuickCam® Pro 4000
QuickCam® Zoom
ClickSmart™ 510
QuickCam® Traveler
QuickCam® Web
ClickSmart™ 310
QuickCam® Express
QuickCam® for Notebooks
What are the Minimum System Requirements?
The minimum system requirements for MSN 6.0 are the following:

• 233MHz processor or faster (500MHz recommended)
• Microsoft Windows 98, Windows 2000, Windows ME, or Windows XP operating system
• Minimum 64MB of RAM (128MB recommended)
• Up to 50MB of hard disk space needed to install — after install, up to 15MB may be needed
• 256-color VGA or higher resolution graphics card (SVGA recommended)
• Minimum 800x600 screen resolution
• Microsoft® Internet Explorer version 5.01 or later must be installed on your computer, though it does not need to be your default browser

Note: If you are not sure if your computer meets these system requirements, please check with your computer manufacturer.
Where can I download MSN Messenger 6.0?
Click here to download MSN Messenger. Note: If you experience any problems downloading or installing MSN 6.0, please contact MSN for further support.

Hi,

You can download the setup from Logitech.

http://www.logitech.com/index.cfm/405/&cl=us,en&legacy=1

Scroll a bit down and you will see your camera. Click the camera, select your operating system and then download.