Question about Makita Brad Nailer Finish Nailer Compressor Kit

1 Answer

Repair kits where can I find repair kits for finish nailers and impact wrenches

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Makita Master
  • 1,378 Answers

I have been repairing Makita handtools for many years and generally order parts from two sources.
If I have the breakdown and know the part/kit number I will call Makita at 1-800-462 5482. A live person will help you with your purchase. Other times I order from Tool parts direct has parts lists and prices for many brands and is easy and convenient if you pay with credit card. Nothing prevents you from looking up a part at toolparts and pricing that part thru Makita. If you are a business may I suggest opening a commercial account at toolpartsdirect to qualify for a generous discount. I rarely order a repair kit favoring replacing only the necessary part to save money. However, sometimes the custmer wants to completely rebuild the tool; since the customer rules, a kit is the best way to satisfy. Good luck.

Posted on Jan 22, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I have a bostitch n62fn finish nailer that wont fire. when i pull the trigger, air comes out of the trigger assymbly. the gun is not jammed, and is receiving correct air pressure.

this may sound stupid but are you pushing it against the wood when pulling the trigger. it has a safety switch on the front so it will not work just by pulling the trigger.

Nov 12, 2011 | Stanley Bostitch N62fn Finish Nailer Parts...

1 Answer

Finish Pro 32 is Leaking air out of the exhaust cap

You have worn or broked o-rings/seals inside the gun. The Finish Pro 32 is one of Senco's older guns and they no longer offer a repair kit for this gun. You have to go to a site like or, find a breakdown of your gun and order each part you need. If you are going to rebuild the gun order all the o-rings/seals (Senco parts that start with LB) and any other parts that may be damaged like the piston stop, springs, etc. Lubricate the o-rings with light grease as you put them in and make sure to oil the gun regularly when you are using it to make your work last.

Jan 27, 2011 | Senco FINISHPRO32 ProSeries 16 Gauge...

1 Answer

N62FN: air leaks at trigger switch how to replace o-ring.

Be careful, the leak may be within the trigger assembly itself. Check the link below for a pointer to a parts site that also has exploded diagrams of the gun. These diagrams will assist in parts replacement. The trigger assembly should be available for around $25.



Jan 02, 2011 | Stanley Bostitch N62fn Finish Nailer Parts...

1 Answer

After 15 or 16 coils, it would not fire. took top

Look on ebay for rebuild kit # RN46-RK , this kit has all the parts needed to restore to like new. The kit is easy to install and should last for many jobs to come. Be sure to oil the nailer once or twice a day with a few drops or bostitch oil or any nailer oil. It is sold a Lowes for about $3. Good luck

Oct 09, 2010 | Stanley Bostitch Rn461 Gun Coil Roofing...

1 Answer

Where can I get rebuild/overhaul kits for DeWalt and Porter Cable 5/8"-2" finish nailers?

Kits and parts are sold at your nearest dewalt service center or if you like to order parts on-line check out . They have good prices and fast delivery service for parts in stock. Good luck

Oct 09, 2010 | Air Tools & Compressors

1 Answer

Air bypassing when the trigger is pulled, nail gun will not fire

You will need to get a repair kit for that model and brand nailer. It has a leek in the diaphragm or a bad O-ring.

Aug 28, 2009 | Senco 1Y0013N FP35 1 1/4 Inch To 2 1/2...

1 Answer

Nail Gun cost

A good-quality starter set, including both a compressor and a small nail gun, can be bought for around 200 US dollars (USD). More sophisticated models can reach 1000 USD or more. Optional features such as a hard-shell case, safety trigger, and depth adjustment can drive the price even higher. For one-time jobs, a nail gun can also be rented at hardware stores and home repair centers.

Sep 01, 2008 | Makita Brad Nailer Finish Nailer...

Not finding what you are looking for?
Makita Brad Nailer Finish Nailer Compressor Kit Logo

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Makita Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1378 Answers

james allen
james allen

Level 2 Expert

109 Answers


Level 3 Expert

479 Answers

Are you a Makita Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides