I need instruction to operate my canon Power Shot A590.
My name is Deloris J. James I am in Washington DC for the Inauguration and I left the instruction to my canon at home in Garland, Texas. Can you e-mail me a small instrution booklet to where I am staying. The e-mail address is firstname.lastname@example.org. I am send you this infor from e-mail email@example.com
I am having problems with Auto flash and night time flash. How do I set this.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
E00840 is a fan error code, the fan is not working correctly. I would check all the fans for operation. I have a bad feeling that the fan that is not working correctly is the power supply fan, you will need to replace the DC power supply on the left side of the copier.... Good Luck
Hi, on leftsideway in lower left section is small plastic cover with one screw. remove screw and cover. You will see small button on el.stamp board. Power On the copier and press button. Turn off and on the copier.
did you check to see if the maybe it was the dc power supply fan(fm6) that has burned out and is causing the ih power supply fan(fm7) to act up. one could cause the other to go bad..... also believe it or not the DC controller controls all fan functions so maybe one of the fuses on the dc controller could have blown out as a result of the inital fan going bad. that is where i would go with this next.. check continuity in all the fuses on the dc controller to make sure they are all intact...
if you have any problems or need any help please call me
For printing the Legal Size (8.5′x14′) in cannon LBP-1210, follow the instruction: Step 1- Go to start Step 2-printer and faxs Step 3-select printer(Canon LASER SHOT LBP-1210) Step 4-go to file Step 5-select Server properties Step 6-select creat new form (for legal page) Step 7-give form name legal 1 Step 8-give paper size width 8.50in, hight 14.00 Step 9-give paper margin top 0.30in, left 0.30in, right 0.30in, bottom 0.30in Step 10-select save form Step 11-then select advanced Step 12-select informational notifications for local printers Step 13-select apply Step 14-then close Step 15-select Canon Laser Shot LBP-1210 Step 16-select printer Step 17-select properties Step 18-select-select forms Step 19-select change forms Step 20-select legal 1 Step 21-select OK Step 22-select apply Step 23-select OK
Remember: 1 U need to set paper size (8.5′ x 14′) manually in the word
documents and befor printing you need to set in printer properties
"Legal 1′ for printing. Print preview may not show the whole page but
the printer will print the whole page.
All the best.
Pls Do this
Then, file>server properties
In forms check creat a new form and give name Leagalx
Set Width 8.5in Height 14.00in Left 0.50 Ri 0.50 top 0.50 bott 0.50 then save form and close it.
Open the printer properties select forms > change forms
and select the "leagelx". Ok.
Start - settings - printers - go to file menu - click server properties - create new form - named as Legal - width 8.50 Height 14.00 inches
left, right, top, bottom - give specification 0.20mm and go to canon printer icon - properties - select forms - click form 2 - change it to new form named as Legal - apply - and then OK - print a test page with the specifaction named as Legal