Question about Crosman (4032)

1 Answer

Reassembly of Air Rifle

I am in need of the diagram for my Crossman 2200 Magnum model 2200 .22 CAL Pellet gun. I took it apart to clear a jammed pellet and can't remember where all the pieces go as they came out too fast. A pic or diagram will help loads. Thank You in advance for anyone who can help.

Posted by on

  • Kamakea
    Kamakea Mar 05, 2009

    Thanx 4 the link it is perfect. So perfect that I can probably take the rest apart and clean. You R a lifesaver and I would sure like to return the favor someday if ever a problem should arise that I know the answer 2. I will check in every now and again. 

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Go to www.airgundevelopment.com and scroll down to the link that says crossman valve. I used these pictures to get mine back together. It's not an exact science, but it sure does help.

Posted on Mar 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

397 Ben/Sher .177 air rifle - installing repair kit problem


Crosman bought out benjamin / sheridan, and they still repair just all their pump guns. The ring sounds like a piece of a pellet, the barrels are silver soldered to the bottom tube, Not lead. Also, the repair kit should not have too many parts, you can only go so far with those guns before needing special equipment to get them apart. Get a hold of Crosman and tell them that benjamin sent you a bad part. They should fix it.
I had an old Benjamin Franklin in .22 cal, it was just a brass tube with a stock and barrel. I sent it to them, to be repaired, and I wanted the .22, because I had the 5mm and the 177. So I got it back, cost $29, New barrel, in .177, soldered on, new guts, new paint, trigger, bolt, the works.. Brand new gun. I told them I wanted the brass and I wanted the .22, They said oops, sorry. I didn't complain, nice old gun. Hope this helps.

Jul 29, 2009 | Crosman (4032)

1 Answer

I took apart my crosman 2100 classic .177 caliber pellet/BB repeater and can't put it back together. Any suggestions?


go to the crossman web site and see if they have a service diagram for that weapon or call their tech department and ask if the can send you a diagram on that model so you have somthing to go by next time take a table put numbers on it and place each piece under a number as you take it apart then just start from the highest number and go backward till you finish it thats ho the army dose it

Jul 27, 2009 | Crosman (4032)

3 Answers

I took apart my 66 powermaster bb gun and i cant put it back together? can u give me a diagram of picture


66 pdficon.gif
C66-OM
pdficon.gif
C66-EVP & PL 1 & 2
Powermaster. Pneumatic, BB repeater, .177 cal., single shot pellet. First variant w/zinc receiver. 1983-1988 Some parts are available. 66 pdficon.gif
C66-OM
pdficon.gif
C66-EVP
Powermaster. Pneumatic, BB repeater, .177 cal., single shot pellet. Plastic receiver. 1988-2001 Some parts are available. 66 pdficon.gif
C66CLIP-OM
pdficon.gif
C66CLIP-EVP
Powermaster. Pneumatic, BB repeater, .177 cal., single shot pellet. Plastic receiver and 5 shot manual clip. 2001-Present Some parts are available
HERE IS MANUALS I FOUND..HOPE THIS HELPS..

Apr 11, 2009 | Crosman (4032)

3 Answers

Pump Lever Hangs Down


try tighnening the screw or bolt that holds the pump on the gun

Dec 10, 2008 | Crosman (4032)

2 Answers

Bb gum wont pump up


Open the pump arm (fore stock) all the way and check the rubber O-ring for cracks. If it's just dry, get some Pellgunoil® Lubricating Oil or the equivalent from a gun/sporting goods store and oil it.

Sep 16, 2008 | Crosman (4032)

4 Answers

Crossman Mark 1 CO2 Pellet Gun


Check out www.mac1.com. Tim can sell you the o-rings or customize your gun to another level (see the LD pistol).

Steve

Jul 22, 2008 | Optics

5 Answers

Model 342 Benjamin Franklin 22 caliber air gun


I recently purchased a rebuild kit for my 342. I bought the kit from airgundepot. It was the kit for the
392 and I modified it a little. On the new plunger, you have to drill a hole in the center of it the same
size as the pin's smallest diameter. You can use all of the parts in this kit except for the small o-ring. I think it sold for about 39 dollars or so. My rifle was manufactured in 1972 and it fires like new.

Jun 03, 2008 | Crosman (4032)

5 Answers

Fix crosman airgun


need bolt for crosman silhouette sport pistol looks like a crosman 2300T are they the same? if so where can buy bolt

May 27, 2008 | Crosman (4032)

4 Answers

CROSMAN 760 PUMP PELLET RIFLE REPAIR


How do you change the air cylinder

May 26, 2008 | Crosman (4032)

Not finding what you are looking for?
Crosman (4032) Logo

Related Topics:

1,120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crosman Optics Experts

Brad Brown

Level 3 Expert

13822 Answers

raysaw

Level 2 Expert

223 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

12188 Answers

Are you a Crosman Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...