Question about Proform Crosswalk 500 Treadmill

2 Answers

Treadmill, proform crosswalk caliber treadmill, has jerky motion

I would like a manual or ideas on how to repair

Posted by on

  • 3 more comments 
  • quelsosweet Apr 21, 2009

    same problem- at first just the jerkey motion but now the belt will completely stop for a short time.

  • Anonymous Mar 15, 2014

    When walking on my Crosswalk Caliber treadmill, it slows down and not consistent with my walking. Has anyone else had this problem is the motor or belt

  • Anonymous Mar 18, 2014

    I have a proform 480 crosswalk treadmill had it in storage now it everything works but the belt dont move

  • Anonymous Mar 30, 2014

    Proform crosswalk 545

  • Anonymous Apr 01, 2014

    Manual

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

At low speed the tread mill will not work.How do you adjudt belt

Posted on Feb 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Nordictrack E7 SV elliptical is not powering on when plugged into the wall outlet. I tried putting batteries in and it still won't power on. Is there a fuse or something that may have blown?


there would be a circuit barker on the treadmill. check whether it is in off position .
If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Jan 08, 2017 | NordicTrack Exercise & Fitness

1 Answer

Thermomix tm5 error message C152


If you wish to get some details about treadmill error codes ; visit the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Jan 07, 2017 | Exercise & Fitness

1 Answer

Schwinn srb 1700 will not read the speed or RPMs and the unit turns off after 5 minutes by itself. I was thinking of replacing the sensor but I can not find the part online. Any help would be great.


please see the video and lube the rollers bearing front+back too
2) Run the software calibration for easy diagnostic with sensor speed.and fix it.
Steps for Newer Style Console Calibration
1. Locate the calibration area on the rear or underside of the console (a hole, near the console's center, that goes through to the electronics board. (This hole should not have a screw in it.)
2. Insert a pencil (eraser end), into the hole and feel around for the cal button (will click when pressed).
3. Press the button 2 times (with the pencil eraser). The first click should show CL11 in the console, the second click should show CL21.
4. If the process was done correctly, and CL21 appears in the console, you are in "calibration mode." The next few steps consists of pressing buttons on the console and observing settings. This will not require any other tools.
5. Press ENTER. CL22 should display in the TIME window and (??) in the SPEED window.
6. Press ENTER. CL23 should display in the TIME window and (??) in the SPEED window.
7. Press ENTER. CL24 should display in the TIME window and (??) in the SPEED window.
8. Press ENTER. CL25 should display in the TIME window and (??) in the SPEED window.
9. Press ENTER. CL26 should display in the TIME window. You should then see the letter "E."
10. Press ENTER. You should see "SS" or "55" in the console.
11.Push the STOP/START button. For safety, at this point, you should step off, or be off, the treadmill.
12. Push the ENTER button. The walking belt should start to move, accelerate to maximum speed, then stop on its own.
13. When the belt stops, the incline should self test by raising to its highest incline position, then lowering back down to its lowest position.
14. Once the incline test is complete, push the POWER button 2 times. The unit should shut off and the console should go completely blank. If this happens, the treadmill is done calibrating and is ready for use.
If the letter "F" appears in the SPEED or INCLINE window when the power button is pressed 2 times, the treadmill is indicating a failure somewhere either in the SPEED or INCLINE (depending on the window the "F" appeared in). Troubleshooting the failure would be the next step.
God bless you

Oct 01, 2013 | Exercise & Fitness

1 Answer

Woodway treadmill parts


Ernesto I don't have a manual. Is this sensor near the front of the machine or the back ? Is it on a board or ?
Thanks,

Andrew

Jun 07, 2013 | Exercise & Fitness

1 Answer

Key pad not working


Most likely the control panel and its accompanying control circuit board is defective.

Jan 22, 2013 | Proform - Zt3 Treadmill

1 Answer

Removing motor cover on a viewpoint 2800


fitnessrepairparts.com will give you full diagrams

Nov 24, 2012 | Nordic Track Nt Viewpoint 2800 Rear Roller...

Not finding what you are looking for?
Proform Crosswalk 500 Treadmill Logo

2,267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proform Exercise & Fitness Experts

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Jon Schniers

Level 1 Expert

13 Answers

Are you a Proform Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...