Question about Akai LCT2715 27 in. LCD Television

1 Answer

MY TV 27 INCHES LCD DONT TURN ON ONLY THE RED LIGHT I WANT TO SEND FOR THE MOTHER BOARD WILL THAT FIX IT

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Hello,

I have repaired the same set nowadays. I have carefully re-soldered all the components on the Main Board (scaler board). The problem was the soldering material which is ROHS compliant...

A defective PSU can cause such a symptom too, especially the bad electrolytics is the most common problem with these sets.


Thomas

Posted on Jan 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV wont trun on. Pull plug and wait 5min, still wont turn on. What can be done to fix this


Tv turn on?Front LCD panel LED power light indication flashing?Yes,than the power supply board is dead,that the board where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Jul 09, 2010 | Philips 32PFL3403D/27 32 in. LCD TV

1 Answer

Plasma 50 inches dont turn on


The power supply board is dead.Tries the websites like Shopjimmy.com,Ebay.com to buy the refurbish power supply board for the replacement.

Jun 22, 2010 | Panasonic Viera TH-50PX80U Plasma TV

4 Answers

My samsung t.v. 52 inches will not come on it


My tv is brand new samsung 32 inches lcd. I accidently press power button several times and now i dont see any red dot. when I use my remote control, i see red dot but thats all

Jun 19, 2010 | Samsung LN52A850 52 in. LCD HDTV

1 Answer

The red light is blinking


Power supply board is dead.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Apr 17, 2010 | Toshiba 27WL46 27 in. LCD Television

1 Answer

Delay light is flashing on tv, but wont turn on. Not sure if problem is tv or remote? Dont see light on remote when push in buttons?


The problem with the unit is power supply part number,MLT166A.If you can not find one you can try to fix yours.First you have to take out power supply,Replace 3 electrolytic caps EC18,EC19,EC20 all are 1000mf at 16 volt.Then find Z3 on same board,it is a 27 volt zener diode 1 watt,part number 1N4750A.Put board back in then unit should work.

Oct 03, 2009 | Akai LCT3701AD 37 in. LCD Television

2 Answers

My Philips 32PFL5403D LCD TV does not turn on and blinks 6


Normally, this happens when the TV detects a bad circuit board and goes into " Protection Mode ". The blinking red light should be a error trouble code. I don't have the Service Manual on hand for your model number to tell you what the code means. Most likely the TV has a power supply related problem. It's possible that it maybe a bad capacitor or transformer on the power supply board. But, I can't say it's 100% the problem because I can't actually look at the tv over the internet. I can only make guesses with the symptoms.

You have a few choices:

1. You can try leaving the TV unplugged for 30 - 45 minutes so the TV can discharge and reset itself.
2. If by chance the TV is still under warranty, go that route.

3. If you have some electronic experience, if you can find and purchase a Service Manual over the internet; It will help you diagnose the source of the problem and fix it by soldering in the new part. The Service Manual will give you red light blinking codes, circuit diagrams, test points, and part# lists.Usually, cost under $20. And most cases the new part cost less than $15.

4. Pay a TV shop to do the repairs. It maybe costly, but get an estimate of how much they will charge. That way you can decide if it worth repairing or replacing the whole TV.


I hope I shed some light on the subject for you.

Jul 15, 2009 | Philips 32PFL5403D/27 32 in. LCD TV

1 Answer

Solid red light


The inverter board is damaged at this point. you will need to replace this failed board in order to restore normal functions.

Jun 25, 2009 | Akai LCT2715 27 in. LCD Television

Not finding what you are looking for?
Akai LCT2715 27 in. LCD Television Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you an Akai Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...