Question about Orion STV2763 27" TV
Hi i have cablevision connection and it has is own i/o [optimum online] remote .....but to program the remote i need a three digit or so number ......please help... thank you in advance
I need the name and model number of the remote control, please.
Posted on Jul 03, 2007
Tips for a great answer:
Sep 06, 2014 | Sony FD Trinitron WEGA KV-34HS420 34" TV
Feb 02, 2011 | Sanyo DS31590 31" TV
*Tip: The iO button will light on for 20 seconds. The
next step must be entered while the iO button is
STEP2 Press the [INFO] button.
The iO button will blink number of times indicating the
number of each digit of the code number. Each digit is
separated by a 1 second interval of the iO button being
Example :One blink, three blinks and eight blinks with
an interval of 1 second of iO button being
turned off, indicates the code number 138.
Note :Ten blinks is equal to the number 0.
D. Program the Volume Controls.
By following the steps below, the user can program
the volume controls (Volume UP, Volume Down and
MUTE) . The default volume control settings on the
remote control is TV volume control. If you wish you
can control the volume via your CABLE box, use the
STEP1 Press the [CBL] button and the [SEL] button
simultaneously for 3 seconds. The iO button
will turn on.
*Tip : The iO button will light on for 20 seconds.
The next step must be entered while the
iO button is on.
STEP2 Press the [VOL +] button.
STEP3 Press the [CBL] button.
The iO button will blink twice to confirm the
To return to original state:
If you wish you can control the volume via your TV,
repeat the above steps by pressing [TV] in STEP3 .
Dec 23, 2010 | Curtis CM13102 13" TV
Dec 15, 2010 | Sylvania SRT2420P TV
Nov 15, 2010 | RCA F27664 27" TV
Nov 26, 2009 | Sanyo Standard (CRT) Televisions
Nov 11, 2009 | Philips Magnavox 20MS3442 20" TV
May 03, 2009 | Sylvania 6427TE 27" TV
Dec 29, 2007 | Standard (CRT) Televisions
Feb 16, 2014 | Orion STV2763 27" TV
345 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: