- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
surely you got software with the all in one printer. if you have plugged in the printer before you installed the software then this sort of thing happens. if this is the case them un install the the printer completely switch off the pc wait ten seconds and reboot the system them install the software without the printer in. once software is installed then plug in your printer and the pc should recognise it.
a device driver is a software for a specific hardware that allows the BIOS and Operating systems to recognise the hardwares available in the PC/laptop...
u need to check which hardware needs a driver for Win7 in the Device Manager and then look for the correct driver from the manufacurer of the HW
Go to the Omnipage sight, they should post the scanners that have problems with their software. If you ahve the packaging, the guide should tell you or direct you a site that carries this information. Call Epson DX scanner or go on line to their site and query them about the problem, they should help. Go to the Contact Us. This should help you good luck