Question about Mitsubishi WD-62725 62" Rear Projection HDTV-Ready Television

1 Answer

Screen won't turn on --flashing green/solid green power light

I have a projection screen Mitsubishi WD 62725 and the screen never appears when I turn on. It is plugged into a surge protector. The light is either a flashing green or a solid green, depending on when I hit the reset button. After about a minute, the Tv automatically powers off. Is there something that I can do to fix this reasonably? I just ordered a lamp replacement but I don't think that is the problem.

Posted by on

  • rckaye Mar 02, 2009

    TV WILL NOT TURN ON , GREEN FLASHING LIGHT IS ON CONTINUOUSLY WHEN UNIT IS PLUGGED IN . WILL NOT RESET WITH USE OF RESET BUTTON . TV HAS BEEN REPAIRED ONCE ALREADY FOR THIS PROBLEM WHEN IT WAS ONLY 2 YEARS OLD AND HAS HAPPENED AGAIN . IT WOULD NOT BE  WORTH REPAIRING IT AGAIN , UNLESS THERE IS A USER SERVICABLE FIX  THAT CAN BE OFFERED .





×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 38 Answers

Your main boards are bad. They are no longer available, You have to have the chasis rebuilt. Mitsubishi is rebuilding these chasis. You have to pull it without any cut wires & ship to Georgia.
tvdoctor

Posted on Mar 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The power went out at my house for about two seconds and when it came back on the TV timer light started blinking and has never stopped. I have pushed the reset button and have also un-plugged the TV and...


Thats a common problem when the power goes out the weak caps can no longer charge and then the led will blink green non stop. www.tvrepairworld.com has the Mitsubishi V26 Chassis DLP DM/Power repair kit should solve that problem. The kit contains the capacitors and the CD with detailed repair instructions.

Oct 07, 2010 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

Wd-62725 green light flashing continuously and TV will not Power


just happened to us, we unplugged in from the surge protector and plugged it in the regular wall outlet and were able to get the tv to come on, don't know why, but it worked

Apr 07, 2010 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Blinking "Timer" light for WD-62725


If this is a DLP, you may have problems on the FMT/DM boards in the sealed electrical chassis.

That's a big problem, because Mits doesn't make the DM/FMT boards available anymore. They are only available for rebuild from Mitsubishi and other qualified places.

There is a chance that there are some vented capacitors on the DM and FMT boards you might be able to replace, but it's for someone really comfortable with completely disassembling a set, soldering in 8 new caps and rebuilding the chassis.

Rebuilds will run you $400-$500 in rebuild costs and an additional $200-$400 in labor, depending on the joint.

Jul 26, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Audio is working, no picture


you have either a defcetive signal pwb, FMT pwb or light engine. Does the menus appear clear when you press menu?

May 20, 2009 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

My mitsubishi tv, WD-62725, has audio but no picture.


You need a professional.
Stop using the TV until it is repaired.
Continue to use it and your problems will multiply and grow more expensive.
Call the manufacturer to find you nearest authorized service center.

MR. TV Sales & Service Inc
Milwaukee Wisconsin 53405
(414) 762-8600
Established 1974

Mar 24, 2009 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

Tv won't turn on?


Your main boards are bad. The FMT, DM, & Power Supply. They are no longer available, You have to have the chasis rebuilt. Mitsubishi is rebuilding these chasis. You have to pull it without any cut wires & ship to Georgia.
tvdoctor

Dec 27, 2008 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

Mitsubishi wd-62725 screen turns pink


one of your projectors is going out...get.tech to ck..hang up when he tells you service call fee or I'll call you back lol

Jun 11, 2008 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

Mits 65" wont power on


set could have a short and be in shut-down mode ...making just a blinking green light on the front.

remember your standby circuit is always on waiting for a remote command and can be damaged by surges in the line from storms.
please add a surge protector in future after you found the failure.

May 11, 2008 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

WD-62725 DLP TV Automatically Turns Off


Its usually your DM control board!!! it needs to be replaced!!!

Mar 29, 2008 | Mitsubishi WD-62725 62" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-62725 62" Rear Projection HDTV-Ready Television Logo

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1255 Answers

The Knight
The Knight

Level 3 Expert

76054 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...