Need threading instuctions for durkoff 17-1-1

goto this link and you might find your manual.
https://www.google.co.uk/webhp?sourceid=chrome-instant&rlz=1C1CHBD_en-GBGB719GB719&ion=1&espv=2&ie=UTF-8#q=durkopp%20adler%20267%20373%20manual

I need to know the model number of the Pegasus to see if I can find some instructions on threading. so if you will send me a comment with the model number I will check for you.

I need more infor to help you. I do have that model here at home.

try Janome customer service or sewvacdoctor.com

Your embroidery unit needs to be re-calibrated. Check your user manual to determine if that's something you can do. Otherwise, you'll need to have an authorized Husqvarna Viking dealer do the calibration and make sure the hoop sensor is working via the service menu. You can find authorized dealers close to you at the Husqvarna Viking website - http://www.husqvarnaviking.com/us Good luck.

Visit us at www.ifixmachine.com to avail for a new manual for only $12.00

I have the same machine and this is how I do it. If this doesn't work, then it must have a problem and not because you have done it incorrectly.

Thread the main thread on machine as shown.
Pull the end of the thread throw the top hole in the bobbin roll ( you know the little clear thing where the bobbin thread will be wind on.
Place it on the bobbin holder and push that unit to the right to touch the thing there on the right....Now turn on your machine. Either by using the sew button or using the foot pedal.
This should work...

Good luck.

how to thread a janome model 372

How do I thread the Pfaff Tipmatic 6110? It is my daughters machine and I'm sttumped

ok.....without the bobbin case in and a fresh needle in, turn the machine to the side and turn the crank wheel counter clockwise, the hook of the machine should bypass the cusp of the needle, thats the part of needle that is by the eye and curves in alittle, if it is not the timing is off, try to adjust this by adjusting the needle bar, this is not a easy easy repair but takes patients, im assuming that, thats where it was thrown off timing