Question about DISH Network Televison & Video

1 Answer

TV remote won't work after changing batteries

Have Dish Network in my home. Rec'd message batteries low in remote. I put 4 new ones in and nothing...the remote is dead. I tried 4 more new ones in case ones I put in were defective. Still nothing. I have reset my box and still nothing! I have a Joey unit if that makes any difference. I've only had Dish for few months and it has been a nightmare! Any feedback? Suggestions? Just want to watch regular TV!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • DISH Network Master
  • 74,136 Answers

When battery is changed, all the previous settings will be lost from the remote control. You should once again set it to your device, using codes.

Posted on Jan 11, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fixyadude1
  • 57 Answers

SOURCE: RCA remote

Could it be possible that the remote needs reconfigured? If none of the buttons work, the it could possibly be that you need to re-enter the TV code back into the remote.

Posted on Sep 24, 2008

  • 51 Answers

SOURCE: dish network remote

i would suggest trying power scan again...

1)hold down tv button next to sat button in top left corner
2) when all buttons illuminate press 500 into remote
3)press pound sign
4)Hello, please help..
5)hold town tv button again.
6)when all buttons illuminate press big red power button
7)press up arrow once a second until tv shuts off
8)press # pound sign
9)try to turn tv back on w/ big red power button
10)if tv doesnt turn back on try again from step 2 but use down arrow instead

if this doesnt work try addressing your old remote to the receiver by pressing record from system info screen

Posted on Aug 06, 2008

safenude
  • 124 Answers

SOURCE: need phillips magnavox code to put into dish network remote

I'd be happy to help you with your request. The codes you are looking for are:

PHILIPS ..... 002 009 109 202 209 210 310 402 408 508 510 807 901 914 917

If you are satisfied with my assistance please use our rating system to evaluate my service. Thanks for using Fix Ya!

Posted on Jan 30, 2009

  • 8 Answers

SOURCE: Dish Network not working all... lights up but nothing else!

call dish network. they have all the information you could possably need.

their phone number is inside your recivers manual

Posted on Aug 19, 2009

  • 60 Answers

SOURCE: RCA rcr 461 remote won't program

Search for the codes in here. It's RCA's remote code finder.

Posted on Aug 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dish network remote turns tv on but wont change channels


1) clean the contacts batteries.
2) change by new batteries
3) resolder wires connectors batteries
4) Open the remote control, and clean the keypads very well with special spray contact R. Shack
5) Otherwise you must go to the repair shop TV, FOR Fix it
GOd bless you

Jun 18, 2012 | DISH Network Televison & Video

1 Answer

TV 1 does not pick up Dish, scanned but doesn't show Dish


1) change the new batteries
2) Clean the contacts batteries very well
3) retight the springs contact for better contacts batteries
4) Open the remote and clean the keypad with special spray contacts cleaner.
Otherwise you must go to the repair shop.
download again the code: www. fitness.manualsonline.com
God bless you

May 23, 2012 | DISH Network IR Remote Control

1 Answer

I'm hooked up tp Dish Network an hit wrong button on top for volume and now pic is gone. in lower left corner says no signal., but dish is working, just no picture on screen


Hey there, Cheri Torres with DISH Network Customer Service here. It sounds like you are going to need to change your TV back to the proper input or channel. If the TV remote is not working to change the channels you can also use the buttons on the front of the TV. First look for a button listed as either input, TV/video, source or AUX. When you press this button it will start cycling through all the inputs available, make sure to cycle through them slowly because it make take a couple seconds for the picture to come in. If you do not find a picture on any of the inputs you are going to need to try the different channels. Normally for a TV where the receiver box is the TV should be set to channel 3 or 4. Once you have found your DISH Network picture you will want to make sure to push the SAT button on the DISH remote so that it doesn't change the TV channel again. I hope you find this information useful and if you have any further questions or concerns please let me know. Thanks. :)

Oct 22, 2011 | Craig CLC501 15 in. TV

1 Answer

My remote doesn't work, it won't change the channels


It sounds like the remote would need to be address to the receiver. This needs to be done from the main TV location, and I have listed the steps below!

Addressing Remote to Receiver:

1.) Go to System Info screen.
2.) Hold down the SAT button until all mode lights light up.
3.) Enter a number between 1 and 15 using the numeric keypad on the remote.
4.) Press the pound (#) button.
5.) Once the SAT button blinks three times, press record.
6.) Test remote and see if works.

Hope that helps!

Tommy Faust
DISH Network

Jul 04, 2011 | DISH Network 32 Ir 137180 Remote 5900 3100...

1 Answer

Tv will not receive programming, have three tv's in house, two are working , one won't. keeps saying no program information.


chief0327

I'm not sure by your description of the problem is you are saying your TV has a message saying "No Program Information" or if you are getting this on your Guide. Would you please elaborate for me so I can assist you with this problem? Each would require different trouble shooting steps.

Ray Calo
DISH Internet Response Team

Jun 09, 2011 | DISH Network IR Remote Control

1 Answer

MojogiMy GHD1621F2 freeview recorder is frozen on one programme, won't respond to the remote at all (have new batterys) and won't respond to buttons on front. Turning off and on doesn't work...


Hi mojogill,

It sounds like the receiver may be locked up. If the buttons on the front do not work, then try unplugging the receiver for 5 seconds and plug back in then check to see if everything is working fine.

If you need any further assistance with this, feel free to contact me at thomas.faust@dishnetwork.com. Thanks!

Tommy Faust
DISH Network

May 25, 2011 | DISH Network ViP722 DTV Receiver /...

1 Answer

Remote tv on & off won't work


I do hope that this has been resolved. If not, I have enclosed some steps for you to follow. You will want to follow the link below, which will walk you through a power scan. A power scan will scan your tv for the code that works with the remote. I hope that this helps.

http://www.dishnetwork.com/SupportSection/power-scan-instructions


Becki Barned
DISH Network Customer Service

Jul 27, 2010 | DISH Network IR Remote Control

3 Answers

I need a satellite Bell express Vue code (3100) I can't use the remote control Dish!!!!


Programming an Expressvu remote control can be frustrating. There are two basic ways of doing in it. The first one involves knowing both your TV brand name and also knowing the proper code to input in your remote. The second method is doing an automatic search. The following is a step by step procedure in how to program your dish network or Expressvu remote.

1)Make sure your TV and Satellite Receiver is ON.
2)Press and hold TV button until all lights on the side of it flashes. The TV button is the second button on the Top left hand side corner of the remote control.
3) Release that button, then press & release RED Button. You will notice TV button is stays on. If, it doesn't stay ON, you must repeat step 2 & 3. Otherwise, your batteries are low, you MUST change then.
4)Press and release the UP Arrow Key on the remote until TV turns off. Notice the UP arrow key button is the button below the volume keys (Stop button for VCR.)
5)Make sure you are aiming remote control to TV while pressing and releasing UP arrow key button. When you find the right code, the TV will turn OFF.
6) Immediately after, TV turns off, press # key.

Jan 23, 2010 | DISH Network IR Remote Control

1 Answer

How to change channel on receiver #2 without remote on Dish network


If you have a DVR you can put your recinver into single mode on the front of the rec and enable shared view, menu - 6-2. if you havea 322 syou will needa new rem. 4.0 for 322 tv 2

Oct 29, 2009 | DISH Network IR Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

brian soufane

Level 3 Expert

693 Answers

john milligan

Level 3 Expert

512 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...