Question about Jabra Cruiser InCar Speakerphone Black

1 Answer

How do I remove the antenna from my JABRA Crusier in car speaker phone? The antenna also acts as the clip to hold the Cruiser to the visor.

The antenna wire is bent and I need to take it off in order to straighten it.

Posted by on

  • Rod Moxley Jan 13, 2013

    JABBRA does not have any tech support after 1 year, so they were no help at all. The antenna must have some sort of locking mechanism once it is assemble to the Cruiser, but I have not been able to figure out the secret. I've put a lot of pressure on it to get it out, but with no luck - I don't wabnt to break it...

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The wire antenna is removeable without breaking it. The ends of the wire that are inserted into the back of the unit are bent (L-shaped) inside the unit. With the back of the unit facing you, gently slide the left end toward the center and lift out. Then slide the right end toward the center and lift out. Reverse procedure to replace wire antenna visor clip.

Posted on Aug 11, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
lexzy80
  • 943 Answers

SOURCE: Lost the manual of my Jabra Cruiser. I lost the

You can visit the below website and download the manual or go through the quick guide or FAQ
http://www.jabra.com/sites/mobile/na-us/products/pages/jabracruiser.aspx
Hope this solution was helpful? Please comment for more information and thank you for using the fixya website.

Posted on Jan 02, 2011

Ezrahite
  • 2632 Answers

SOURCE: Need pairing intructions and how to use

Hi,

Welcome to Fixya. Provided the link below of the Jabra Bluetooth Cruiser 5001 Manual

Jabra Bluetooth Cruiser 5001 Manual

If you have questions please let me know. Thanks for using Fixya.

Posted on Apr 19, 2011

  • 15 Answers

SOURCE: I have evidently paired my Droid2 to my new Jabra

you may contact the service provider......

Posted on Jun 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to pair the samsung galaxy s4 to the jabra cruiser


  • Touch Apps
  • 2.Scroll to and touch Settings
  • 3.Ensure Bluetooth is turned on
  • 4.Touch Bluetooth
  • 5.Slide the Power switch to turn the JABRA CRUISER on
  • 6.Press and hold the Multifunction button until you have a rapid flashing blue LED
  • 7.Touch the JABRA CRUISER in the list of devices
  • 8.The JABRA CRUISER is now paired
  • 9.The JABRA CRUISER and Galaxy S4 are now ready to be used
  • 10.Press the FM button in order to start streaming audio via the FM transmitter. The FM LED will turn red

Oct 01, 2014 | Jabra Cruiser InCar Speakerphone Black

1 Answer

Technical support for jabra journey MODEL HFS003


Can I connect my Jabra Journey Model HFS003 to my car radio to listen music, conversations, etc by my speaker's car?

Aug 14, 2012 | Jabra Cruiser InCar Speakerphone Black

1 Answer

How do i make my jabra work with my blackberry


Hi there, You need to pair the two devices. Make sure the cruiser is off, then push and hold the power button the Jabra for 8-10 seconds until it is in pairing mode. You need to continue holding the button after the device has powered on until you get there. Once there, on BlackBerry go to Bluetooth settings and select search for a device. Select the Jabra Cruiser and put in the passkey - 0000. You have now paired the two devices! Alex

Jun 03, 2011 | Jabra Cruiser InCar Speakerphone Black

1 Answer

I forgot my password to my jabra crusier


Press and hold both the red and the rotary buttons for some 3 seconds, until the indicator light flashes alternately in red and green. It is in pairing mode now, thus visible for other devices, for the next 3 minutes. Then, make your phone's bluetooth application search for new devices. After a little while, your car kit should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '1234' (without the quotes). If the pairing process is successful, the car kit should sound a beep.
By the way, if your car kit's user guide happens to be missing, feel free to download it from this location. You will find many details about settings for your car kit there.
Please, let me know if I can help you any further.
Best regards, Carlos

May 26, 2011 | Jabra Cruiser InCar Speakerphone Black

1 Answer

I'm having trouble pairing it with my iphone4.


when you turn blu tooth on on the iphone under settings. make sure its discoverable and then scan while holding down the jabra cruiser in car speaker phone pairing option

Mar 26, 2011 | Jabra Cruiser InCar Speakerphone Black

1 Answer

I purchased a Jabra bluetooth that fits on the sun visor how do I connect with my black berry


Go to options menu on BB bb_icon.gif and locate Bluetooth.
- Enable Bluetooth.
- Then turn on Jabra 250 and Hold down the Multi-Function Button until you have a SOLID BLUE LIGHT on the LED on the headset. This could take up to 10 seconds and will take place after the LED has ceased to flash.
- Click add device on your BB.
- BB will search for your earpiece. 0000 is your passkey to add device

Jan 15, 2011 | Jabra Cruiser InCar Speakerphone Black

1 Answer

Reset iphone need assistance please to start jabra again


but the speaker in pairing mode by pressing and holding the multifunction button until the blue led flashes.
on the iphone, go to settings, 'General' and then 'Bluetooth' and select to 'On'
the iphone will find the speaker and it will appear in the list. when it does, tap it.
tap 'Pair'
you are done.

Dec 17, 2010 | Jabra Cruiser InCar Speakerphone Black

1 Answer

I purchased a new Iphone and my Jabra will not pair. I removed the Jabrsa connection from my old iphone and the Jabra still will not connect. How to reset Jabra and pair new phone?


Hi,
To remove the list, press and hold the Answer/End button, Volume up button and FM button at the same time. A beep indicates the list was removed from the speakerphone memory. The next time you power on, the speakerphone will go into pairing mode as the first time you powered your new Jabra CRUISER on.
Thank You

Nov 12, 2010 | Jabra Cruiser InCar Speakerphone Black

Not finding what you are looking for?
Jabra Cruiser InCar Speakerphone Black Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jabra Cell Phones Experts

xalint1
xalint1

Level 2 Expert

152 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2760 Answers

ka4iup
ka4iup

Level 3 Expert

3957 Answers

Are you a Jabra Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...