Question about Homedics Sound Spa Platinum SS-6000 Clock Radio

1 Answer

No volume coming out of radio??

We just bought the sound spa platinum and we can't get any sound go come out. We have tried radio, CD, sounds, etc. Any thoughts???

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 40 Answers
Re: No volume coming out of radio??

It can be due to faulty earphones or due to the connector and it has a wireless out do check for that if it is enabled u wont hear sound through the speaker

Posted on Jul 03, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Voltage on ss-6000. Lost my ac adaptor, what kind do I need to buy?

This AC Adapter is available on Amazon @

Hope you find this information to be helpful.

Oct 21, 2011 | Homedics Sound Spa Platinum SS-6000 Clock...

1 Answer

Alarm clock

The clock radio is mediocre, according to at least 15% of owners. First, the radio reception lacks clarity and the sound is tinny. Second, there are many small buttons and it's impossible to tell which is which in a dark room. Third, because the volume and radio tuner are adjusted by moving a dial, it is easy to accidentally move the device and turn down the volume as a result. This can be a problem if you've set the clock-radio alarm and the radio volume is too low.Kindly check these first.

Jan 27, 2010 | Homedics Sound Spa Classic Clock Radio

1 Answer

I just bought Homedics SS-4500 Sound Spa Classic and there was no instruction manual in it. Is there one I can download? I don't know how to change the time that is preset or set the alarm? Thank you.

Also note if projection does not work correctly, Ken posted an elegant solution: holding down hour and minute unplug and plug back in (still holding down hour and minute). Made mine work!

Dec 23, 2008 | Homedics Sound Spa Classic Clock Radio

1 Answer

Need new AC Cord for the SS-6000

I've seen this available on Amazon -- Try this direct link ( go to Amazon and search for the product ID: B00ACNGMO8

Hope this is helpful.

Nov 26, 2008 | Homedics Sound Spa Platinum SS-6000 Clock...

1 Answer

Ss 5000 sound spa

Atomic clocks are tricky. The clock defaults to PST.

Turn OFF the atomic time feature (The little radar icon will disappear) Make sure that you have clicked the DST/TZONE button on the back of the clock to YOUR timezone (a P,M,C,or E icon will appear on the front screen.) Then turn the atomic feature ON and hopefully - all is well!

Sep 04, 2008 | Homedics Sound Spa Premier SS-5000 Clock...

1 Answer

Light on the projection is fading

if the led is fading it waring out and it will need replacing try and **** smith electronics or Radio shack take the clock in with you so they can provide better service for you

Jul 17, 2008 | Homedics Sound Spa Premier SS-5000 Clock...

1 Answer


The Bose engineers in their "infinite" wisdom developed a $300 radio with no, that is NO, tone control. This means the only way to tune bass response is to reposition the Wave radio itself. If you put it in a corner of a room, it will produce the most bass. If it is only against one wall, not so much bass. To reduce bass response to a minimum, you would have to suspend the device from a wire in the middle of the room. Good luck. I would never buy a radio without a tone control; I literally inherited by Bose Wave Radio and use external speakers which do have tone controls.

Jun 10, 2008 | Bose Wave Radio

1 Answer

Bose Wave System CD 2000 FM volume much lower cd stops if volume higher.

sounds like a loose cable from the control bard to , some one will have to open up to fix, i recommend bose do that for you,
as for fm volume, the same could be the cause as the fm antenna coudl be disconnected, ( are you using an external FM antenna ?)

Feb 29, 2008 | Bose Wave Radio

1 Answer

Projection display

I had the some problem a few days ago when we had a power outage during the night. Try unplugging it, leave it unplugged for about 10-20 seconds, and replug it back in. Reset your time on the clock and it should work then.

Nov 08, 2007 | Homedics Sound Spa Premier SS-5000 Clock...

Not finding what you are looking for?
Homedics Sound Spa Platinum SS-6000 Clock Radio Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Homedics Clock Radios Experts

Gyula Lacz

Level 3 Expert

482 Answers


Level 3 Expert

3932 Answers


Level 3 Expert

93998 Answers

Are you a Homedics Clock Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides