Walgreens humidifier model 2035 - Humidifiers

Lift the clear tank straight up off the base. Turn it upside down and turn the filler cap clockwise about 3/4 of an inch. It should lift out. Fill and replace the cap and put the tank back on the body of the humidifier. Make sure that the seal to the filler cap is seated properly.

Sorry we have no information on the product.

Go to walgreen store and ask them .or search Amazon com Online Shopping for Electronics Apparel Computers Books DVDs...

I've never seen this model, but it would suggest that the unit is unable to function due to either an electrical failure or needs a serious deep cleaning (esp.the part that interacts with the water to form mist.) I would completely empty the unit and clean it, then partly fill the reservoir with 50/50 mix of white vinegar and water and let it sit for 24 hours (possibly longer) to remove any deposits. (Doesn't take much build up to kill the ultrasonic process). Other than that, try calling the manufacturer and see what they will do for you. (Think it's Sunbeam).

https://www.walgreens.com/store/c/walgreens-humidifier-replacement-wick-filter/ID=prod6242355-product

How do I fill the tank with water

I would call or write to the warranty company: BW Consumer Services, POBox 8134, Elburn, IL 60119. 1-877-365-6274 and ask for the Walgreens Ultrasonic Humidifier 2055 user's manual. That is the information spelled out in the original users manual that come with the product.

Either call or go back to the Walgreens where you purchased the Humidifier. They will either take one from another box or make a copy of it for you.

just warm water and bleach, will have to do it a couple of times

My humdifier ran out of water and is still plugged in. Is there danger in that?