Basically, you pull the ******** the center of the back snug -- however, this particular stroller will not sit at 90 degrees to the ground if that's what you're looking to do, the seatback can only be as up as far as the top comes nearly even with the frame (you run out of adjustment room)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
i had one of these about 5 years ago, you need a set of carseat adaptors that plug in somewhere near the canopy attatchment,possibly they go in where the canopy does( you can't use at the same time)
the seat needs to be laid back so flat if you want car seat on back or if on front you need to push seat forward instead .
hope this helps if not go to jane website and download instructions for use.
I have spoken to the friend who has the freestyle 3XL, and has her pushchair facing backwards (not the car seat, but the actual pushchair). It seems it depends on what age model you have. On mine (sadly) I cannot turn the seat around. However, on the ones which can be adjusted (possibly the newer models - mine was 2nd hand), look under the foot rest. If yours can be adapted, there should be a lever under there which enables you to turn the frame around. If there isn't a lever then it's probably not one that can be swapped.
Hope this is helpful and that yours is one of the models that can be altered!
Leave the (bassinet or seat) on, then flip the stroller forward, the big wheels have to be in the air. put on the clips make sure you put the right on the right and the left on the left push them until they cover the silver screws. then put the wheel board on huging the bar if not it will not go in start from the very bottom. And once its on don't forget to put the elastic with the velcro on. the velcro goes on the bar right above the wheelboard. this will help you keep it up when your not using it. Hope this helped. Nathalie email@example.com