Question about NMB Technologies Fan Motor Case Cooling Fan

1 Answer

NBM fan is too noisy. Is it possible it has overheated?

This is one of four fans in a tanning bed that only has 500 hours of use!
The Tanning Bed has been very well maintained and has lots of clearence for adequate ventilation!

Please respond!!!

Posted by on

  • Aenim4 May 11, 2010

    Are you willing to upgrade to a quiter fan?
    was it always this noisy?
    does it spin faster than the other 3 fans?
    is the bed overheating in the area cooled by the noisy fan?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Most Likely a bearing is going bad in the fan - unfortunate with such low hours - but probable. Make sure nothing is hitting the fan blades on either side of the fan - if not, then definitely a bad bearing and the fan will need to be replaced. Wolff Tanning carries them in stock at www.wolfftanning.com

Posted on Jun 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix my Power Bank iPhone5 case charger


  1. OUTLET CONNECTOR SOCKET IS 5 INLET,4COULERED (RED,WHITE,BLACK&BLUE) WIRESS CONNECTED DIRECTLY TO THE FAN

Oct 29, 2013 | Banks 2000 Ford F-350 - SuperCab, 8 long...

3 Answers

My laptop fan makes alot of noise and gets heated up very quickly.all the games i play cause the laptop to shut down without warning due to overheating.i have tried getting it cleaned, but it doesnt...


Laptop Fan noise:

This seems to be a common problem with laptops over a couple of years old. Dust gets trapped in the copper fins and the fan of the CPU heatsink and reduces the efficiency of the cooling, which results in regular power off's by the laptop as it gets over it's upper temperature setting. The fix is relatively easy, just remove the heatsink unit, blow it clean with compressed air, clean the old CPU heatsink paste off with isopropyl alcohol (IPA) and spray a thin film of heatsink paste on the CPU.


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

Mar 18, 2011 | HP (122702-001) Laptop Heatsink

1 Answer

In my hp 61020 mt destop am facing the fan speed and noise is too high....any solution to this....


It may be just that the fan needs to be replaced.

More likely is that the computer cpu is overheating and the motherboard is ramping up the cpu fan speed to try to cool it, hence the high fan speed and consequent noise. This usually happens when the heat sink is clogged with a lot of dust. It could just be that the fan heat sink came loose.

It may be that it's just a noisy fan, in which case replace it with one that doesn't make as much noise.

Nov 17, 2010 | HP Computer System Cooling

2 Answers

Overheating issue Sony GRT270P


Maybe it's wrong with your heatsink;youcan touch this:
http://www.laptopcpufan.com/sony-laptop-cpu-fans-c-7.html

Jun 27, 2010 | Sony (4-635-961-01) Laptop Heatsink

1 Answer

Cooling fan stopped in my tanning bed. how do i fix it


If it has the 3 prong connector like in the pciture above than its a interchangeable part. yay!

bust out your ruler and measure the diameter of the fan
typically in computers they run 60mm, 80mm, and 120mm

you can buy any fan size you need here

http://www.frozencpu.com/cat/l1/g36/Fans.html?id=iW3bmbvy

Jun 12, 2009 | NMB Technologies Fan Motor Case Cooling...

1 Answer

Dell E521 computer, AMD Athlon? 64 X2 Dual-Core 3800+


If you go to Yahoo and search in shopping you can find the exact same one in there and just decide on which price you want to pay. Here is what I searched and found.

http://shopping.yahoo.com/search;_ylc=X3oDMTEwNTByOW5sBF9TAzI3MTYxNDkEc2VjA2ZwLXRhYgRzbGsDc3Bpcml0?p=Nidec+TA450DC&fr=fptb-msgr&toggle=1&cop=mss&ei=UTF-8

Feb 28, 2009 | Dell (6F858) Cooling Fan

1 Answer

My tannning bed fans wont come on, Is it the relay?


IS THE FAN RECIEVING POWER, IF YES THAN YOU NEED TO MEASURE THE FAN IN INCHES AND IN THE METRIC SYSTEM MILLIMETERS, ALOT OF FAN CONPANY IS USING MM BECAUSE IT EASYER TO FIND AND GET THE RIGHT PART FOR THE CUSTOMERS

ROD

Feb 25, 2009 | Computer System Cooling

1 Answer

Chipset overheating


just do this get a high output fan that will fit in the case set it close as functionally possible and wire the fan to your drive power connectors(Use a fan connector cable if you got one or alot of good tape) some times you got say fu8k the factory fan and its special senors and **** you won't the thing to stay cool right well?!! Then just keep it cool i hope you have learn something today have a nice day (compaqsiget over and out)

Jan 02, 2009 | HP (122226-001) Fan Controllers

2 Answers

Toshiba Satelite M10 cooling system not working


If you DO NOT hear the fan running, have it looked at by a professional. Your fan may have died. If you can hear the fan running, blow out the fan exhaust port in the opposite direction of normal air flow. Especially on lap tops, the heat sink cooling fins become completely clogged with dust. When this happens the processor overheats causing it to run slow and eventually shuts itself down to keep from going super nova. You should blow it out at least once or twice a year. Also, if you use your laptop on the couch or in bed, place it on a hard surface like a cutting board or something similar that will allow air to flow underneath the computer. This will also help prevent dust from the cushions or blankets and such from clogging the cooling fins on the heat sink faster than usual. Remember blow it out in the opposite direction of normal air flow. You want to blow the dust out the same passage it came in through.

Sep 15, 2008 | Toshiba Computer System Cooling

Not finding what you are looking for?
NMB Technologies Fan Motor Case Cooling Fan Logo

Related Topics:

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top NMB Technologies Computer System Cooling Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Justin
Justin

Level 3 Expert

2072 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you a NMB Technologies Computer System Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...