An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has answered 20 questions.
Re: i get a E0000580-000 code from my canon m-1 finisher
Usually a quick fix, something may have gotten under the finisher. Sometimes when this happens the finisher will limit its functions, you can turn it back on under additional functions area and then scroll through the pages. Since its right away error code though i am afraid you will need a tech to come. A motor could be bad or a sensor out of position. Shouldnt be a big deal. Call your local technician.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have a disconnected fan in your machine...you have to check it because maybe you forget to plug it in..or maybe the fan is not working....open the cover and switch in the machine...and see the disconnected or the malfunction of the fan..
Hi Bob Smith,
Error Code E000732-0001 is a reader board error. Please check all your connection on your printer if there is a unplug connection connected to a device. Or just unplug and plug all the connection on your printer.
I hope my solution may help you.
Thanks for using Fixya...;-)
the error 14 is fixing unit error a dn 584 is finisher shutter error first disconnect the finisher and solve the fixing error 14 reset the error copier>function>clear>err>ok and reboot once the unit is ready to copy run 10 copies to confirm then connect the finisher and solve the next error 584
solution : 1. Uninstall driver printer and remove Printer USB cable from computer. After uninstall finish, restart printer. 2. Reinstall driver printer (don't connect printer USB cable to computer). Wait forthe install process,untilmessage "connecta printer USB cabletocomputer". After message appear, connect printer USB cable to computer. 3. Wait process install finish and try to print.
Hello ,actually its a very easy way to install canon 3220 to a network just download the driver from canon official site :software.canon-Europe.com
go to printers and faxes add printer press local then next choose create port choose stranded tcp/ip write down the same ip of the copier then press next ,choose have disk and specify where the file u download it from the site and after that choose from the menu canon clc3220 c1pcl5 then press ok so now the printer driver is defined. now at the other side (photo copier ) press * system management network settings choose TCP/IP and give the machine IP turn off and the on the machine to save the changes .now the machine is connected through the network :)
for more assistant t here is my email email@example.com
Dirty sensor inside finisher, blow whole thing out with air. Sensors look like small black c-shaped with connector with three to four wires. Dust dirt block when not supposed to be blocked. Shutter open sensor does not turn on when the #2 feed motor has been rotated CCW for 1 second.
Had the same problem with my Canon IR2018i... After spending about all day stuffing around and ready to give up... I read in the Color Network Scangear User Manual that "Only scanners on the same subnet (network with the same network ID) as your computer are displayed in the list" So I went the the TCP/IP settings on my copier and changed my subnet mask from 255.255.255.0 to 255.255.255.255 and magically my scanner appeared.... Give it a go...
I'm not too familiar with your machine. Its a bit before my time, nut from the info that I have, the problem is with the finisher. I would suggest that you get a canon technician out to have a look at it.