Question about Vision Fitness 2011 Vision T9800 Hrt Treadmill

Open Question

Speed Stall error showing on treadmill

Treadmilll starts up but after a coupe of seconds stops and shows SPEED STALL ERR 7 message

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ercupa190
  • 12223 Answers

SOURCE: my vision treadmill T9800HRT when start shows

please see the 2 alternatives for error 7.God bless you

E7- 1) Alternative Elevation Motor
1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection
2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate
3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation
4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor
2)Alternative:
Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet
c) Cause: Line Cord Damaged Solution: Replace Line Cord
d)Cause: Fuse Solution: Check Fuse on MCB

Posted on Sep 20, 2013

ercupa190
  • 12223 Answers

SOURCE: my vision treadmill T9800 HRT when start shows

please see the 2 alternatives for error 7. God bless you

E7- 1) Alternative Elevation Motor
1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection
2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate
3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation
4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor
2)Alternative:
Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet
c) Cause: Line Cord Damaged Solution: Replace Line Cord
d)Cause: Fuse Solution: Check Fuse on MCB

Posted on Sep 20, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HI our Bowflex series 3 treadmill is giving us a continued Err L5 code when trying to use our machine. We bought it used so do NOT have ant trouble shooting instructions. Any advice?


Hi There, L5 error should refer to the "LS" error which looks up to a speed problem. When you start the machine up, it boots fine and then when you press start or go is says err ls ? If the walking belt doesn't move at all when you try to start it, listen for a "Click" on that lower board when start is pressed..... If the walking belt moves for a second and then stops and the console says err ls, then you may have a speed sensor problem. These control boards are repaired by Jatinah Electronics who can be found with a google search. Good Luck!

Dec 13, 2016 | Bowflex Exercise & Fitness

1 Answer

Speed Stall error


Have to check the speed sensor. Either the speed sensor is faulty or the can be dust or speed sensor alignment.
If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Dec 12, 2013 | Life Fitness F1 Smart Treadmill

1 Answer

When I start my 2007 Honda Civic Coupe it stalls when I release the clutch. It also stalls when it is in neutral and I release the clutch. No other apparent problems.


moving only or parked.

the ECU, does its best to prevent stalls, in fact it can raise the
idle speed, to stop just that. this is ISC actions. idle speed controls.
if the car love to stall, coming to a traffic light , this is usually
the EGR sticking wide open. (it closes just before you stop)
you can save the stall with a fast right foot
easy? ISC sticking
harder, EGR sticking
impossible. (lost fueling or lost spark or bad DC power to EFI)
the FSM shows the 50k service to clean the EGR main valve.
it must not be sticky. the isc is the same deal, they too can gum up. 1998 , easy.

Oct 13, 2013 | 1998 Honda Civic

1 Answer

My vision treadmill T9800HRT when start shows speed stall and error 7


please see the 2 alternatives for error 7.God bless you

E7- 1) Alternative Elevation Motor
1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection
2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate
3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation
4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor
2)Alternative:
Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet
c) Cause: Line Cord Damaged Solution: Replace Line Cord
d)Cause: Fuse Solution: Check Fuse on MCB

Sep 20, 2013 | Vision Fitness 2011 Vision T9800 Hrt...

1 Answer

My vision treadmill T9800 HRT when start shows speed stall and error 7


please see the 2 alternatives for error 7. God bless you

E7- 1) Alternative Elevation Motor
1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection
2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate
3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation
4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor
2)Alternative:
Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet
c) Cause: Line Cord Damaged Solution: Replace Line Cord
d)Cause: Fuse Solution: Check Fuse on MCB

Sep 20, 2013 | Vision Fitness 2011 Vision T9800 Hrt...

1 Answer

York treadmill t-801la T780 platinum error code 1


see the comentary ERR1 indicates a speed issue. In this case, the motor speed as reported from the optic sensor differs
from the speed setting.
Analysis: Optic sensor signal issue -- Either the optic sensor signal is not right, or it is read incorrectly, or
the signal is not reaching the display.7099b61f-975c-463c-9361-522952e1c927.gif
Run the software calibration for easy diagnostic and fix it. God bless you

Jul 08, 2013 | Exercise & Fitness

1 Answer

Cuts off and speed is variable and shows err 4


Precor Error E4, Incomplete Initialization Probable Cause Indicates that an incomplete upper PCA to lower PCA initialization occurred. When this error occurs, all lift motor and drive motor motion is ceased and the display will go blank except for the error displayed.
Corrective Action Run the initialization program. Caution: The treadmill's running belt will accelerate to the treadmill's maximum speed (12mph). DO NOT stand on the treadmill's running belt during the procedure.
  1. Set the on/off switch to the OFF position. Wait a minimum of 10 seconds to allow the internal power supply to discharge.
  2. Remove the safety key from the console and set the on/off switch to the ON position.
  3. Press INCLINE UP and SPEED DOWN keys together. While pressing these keys, replace the safety switch on the console. Continue holding the INCLINE UP and SPEED DOWN keys until the display goes blank. INIT will appear in the time window of the display. The EEPROM is now clear and reset. After a second, 1.25 will appear in the distance/calories window, 15.0 (the maximum incline) will appear in the incline window, and 12.0 (the maximum speed) will flash in the speed/pace window.
  4. Press QUICKSTART to begin the speed calibration process. Power bits will appear in the incline window, the target speed will appear in the time window and the actual speed will appear in the speed/pace window. At the beginning of the process, the target speed will be .5mph. The running belt will start. Once the actual speed reaches .5mph, the target speed will then change to 12mph and the running belt will accelerate until it reaches 12mph, then it will stop.
  5. When the running belt stops, the display will return to the user mode and the initialization process is complete.
Precor Error Code E4

Feb 27, 2013 | Precor 9.1 Mode 1 Treadmill Repair Parts...

1 Answer

I get an error message E1 on my Athlon model Simplicity treadmill. Belt stops. Any ideas on what this means?


Step 1:

ERR 1 - Motor Movement

ERR1 indicates a speed issue. In this case, the motor speed as reported from the optic sensor differs

from the speed setting.

Analysis: Optic sensor signal issue -- Either the optic sensor signal is not right, or it is read incorrectly, or

the signal is not reaching the display.

Clean the s.speed , test for open or faulty-see the diagram for adjust. tight the connector very well.

God bless you
2_8_2013_11_04_57_am.gif2_8_2013_11_05_17_am.gif

Step 2:

2_8_2013_11_05_40_am.gif

Feb 08, 2013 | Exercise & Fitness

Not finding what you are looking for?
Vision Fitness 2011 Vision T9800 Hrt Treadmill Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vision Fitness Exercise & Fitness Experts

Andrew Taylor
Andrew Taylor

Level 3 Expert

14549 Answers

ray gallant

Level 3 Expert

41433 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Vision Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...