Question about Directed Electronics Dlink DP-301U PRINT SERVER 1-PORT EXT 10/100 (Dlink DP301U) (740T) Print Server

1 Answer

None of my passwords for my D-Link Router DIR-615 work. How do I reset everything?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Hit reset on the back of the device.

Posted on Mar 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a d-link dir-615 password won't work need to reset it.


put the special reset button at the back for a few second with a pin.
When reboot ready,
Step 1: Open your web browser and type in the IP address of the router (192.168.0.1 by default).
Step 2: Enter the username (admin) and password (blank by default), and then click Ok or Log In
Then change settings and passwords.

Jan 01, 2014 | D-Link DP 300 (DP-300) Print Server

1 Answer

How to IP address reset d-link dp-300u


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method.
But after RESET you need to reconfigure it with below method.
Click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Aug 11, 2011 | D-Link DP-300U (DHDP300U) Print Server

2 Answers

D-link model no. : DP-300U forgot user and password


You can reset the router to factory default settings, press the reset button at the back of the router.
creativetech_5.jpg

Please note that after RESETTING THE ROUTER to defaults, ALL SETTINGS WILL BE LOST AND YOU HAVE TO RECONFIGURE IT. Generally, after hard reset you get the connectivity, however, you have to make the connection secure etc.
Reset the router to factory default setting, press and hold the reset button for few seconds (It is at the back of the router near the DC Power Jack). The LEDs will then blink and the routers factory settings would be restored. Please note that, after resetting the router you should be able to see the router and connect to it via LAN Cable or Wirelessly as the router automatic assigns the IP Address and gateway etc. Before proceeding to the next step please make sure that you are getting the signals as well as internet. However, the internet connection would not be secure, which can be done later.

Now, all you have to do is connect to the router and secure the connection follow the following steps: -
First you have to access the router through web browser (Internet Explorer) by typing the IP address of your router in the address bar, which is 192.168.0.1 (Default router settings are written under the router)
(unless you've configured otherwise, the default username is admin and the password "leave it blank") and lookup for the options to do the following: -
1. Change the SSID (Name) of the router
2. Change the default administrative user name and password
(The above step would prevent unauthorized access to your router)

Next step is to secure it:
1.On the left-hand side, under Setup, click "Wireless Setup" 2.Under "Wireless Security Mode", select your desired encryption method (preferably WPA2-PSK)
3.Choose a Network Key - it can be anything, as long as it's 8-63 characters in length
4. Click Save Settings.
Now your router and your connection would become secure and the user has to provide the network key to access the internet.

Let me know if any further clarification/ assistance is required.
Hope it helps! Good Luck!
Don't forget to convey your feedback and approciate the efforts.
CreativeTECH

Apr 16, 2011 | D-Link DP-300U (DHDP300U) Print Server

1 Answer

Can not remember the password for wireless router


If the default password has been changed then -
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Apr 16, 2011 | D-Link DP 300U (DP-300U) Print Server

1 Answer

How to access homepage of dlink DP-301 P+ print server, when u have forgotten its ip address


You need to configure your router with below method. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then set WAN settings as internet service provider settings enable DHCP. .Click on wireless and enabled it. Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Mar 07, 2011 | D-Link DP 300 (DP-300) Print Server

1 Answer

I have print server dp300u it demand to password but i know this password plz tell how find password


In order to get your router back to the original settings, you must push in the reset button (usually on the back of the router) for somewhere between 10 and 30 seconds depending on the router. You may need a pin or something small to push in the button, because it can be recessed. Once you have reset the router, the username and password will be changed to the defaults, admin and password, respectively. One thing you must remember is that resetting the router will change all of the router settings back to the factory settings. This means you will lose all of the changes you made since you got the router. Make sure to write down any things you've changed, so you can change them back after the reset. Also, I recommend updating to the latest firmware after the reset.
If you need more help post back! Thumbs and testimonial are welcome!

Jan 21, 2011 | D-Link DP-300U (DHDP300U) Print Server

2 Answers

Password????


Dear gbp7292, to access the admíns CP on this system yuou may try some of these "default" user and password combinations:

User System Password Manager
User Admin password 0000
User empty password 01234

If this still doesn't works, try doing a hard reset. To do this you will need to hold the reset button for 30+ seconds. After that, you'll have to reconfigure everithing.

Dec 06, 2010 | Linksys WPSM54G Print Server

1 Answer

D-Link DPR-1260 print server setup problem


Try admin for logon & password.
Sometimes it is user ......

Feb 01, 2010 | D-Link RangeBooster G DPR-1260 (DPR1260)...

3 Answers

A reset problem


Try using the PSAdmin software to do a factory reset (download it from the internet if you need to). If it demands a password try the following:

password: SYSXXXX (Where XXXX is the last four digits of the MAC address, which can seen on the underside of the server)

I learned about the password part from http://www.fixya.com/support/t224263-dp301p_psadmin_password_forgoten, which has additional helpful details.

Jun 17, 2009 | D-Link DP 300U (DP-300U) Print Server

1 Answer

I want to put password on my router


just open your dlink ip page and type the username as admin and leave the part of password.

it will open a page where there is a palce to add a wifi password



sagar

May 15, 2009 | Directed Electronics Dlink DP-301U PRINT...

Not finding what you are looking for?
Directed Electronics Dlink DP-301U PRINT SERVER 1-PORT EXT 10/100 (Dlink DP301U) (740T) Print Server Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Directed Print Servers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Are you a Directed Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...