Question about Televison & Video

1 Answer

Remote needs to be too close to TV

I bought my sharp LC-32SB23U on December 14 at Walmart in Bradford, PA. Generally, I am quite pleased with the new TV. The only problem that I have with it is that the remote has to be held within 12 inches of the TV to work. What good is that?!

I have tried new batteries and cleaning the contacts, but nothing helps.

HELP!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 140 Answers

Your remote is defective in that it does not send a strong enough signal to the tv. It is possible that the receiving portion of the tv could be defective but I have not run into that case on tvs that are so new. Since it is so relatively new I would ask for a new one and try it in the store. In either case you need to do this before the warranty is out on your new purchase.

Posted on Jan 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is the audio amp on the main board of a sharp lcd tv


A manual for a measure of the voltage line thats goes to the audioboard and there can be used a fuseresistor a resistor to protect the audioboard if .......
SHARP LC 32M44L LC 32SBB21U LC 32SB23U LC 32SB220U SUPP Service Manual...

Suc6

Oct 25, 2015 | Sharp LC-32SB23U 32 in. LCD TV

1 Answer

TAKING OFF CLOSED CAPTION WITH OUT REMOTE SHARP LIQUID CRYSTAL TV # LC-32SB24U


not possible but note if using a cable box it can also be coming from that.

May 28, 2012 | Sharp LC-32SB23U 32 in. LCD TV

1 Answer

Looking for the fluorescent lights in side about 1/8 diameter for a sharp lcd tv model # LC32SB23U


This Sharp LCD model LC-32SB23U has a total of 10 fluorescent lights in the LCD panel. The part is #RLMPLA029WJN1 and you can buy them at www.encompassparts.com, cost $19.49 ea. Go to web sight and sign in as guess. I just brought one and it is the same lamp and it fixed my tv.

May 16, 2011 | Sharp LC-32SB23U 32 in. LCD TV

1 Answer

I have a sharp lcd tv model# LC-32SB23U. the remote stopped working. changed the batteries. still no luck. bought a new universal remote that did not work. bought another remote over the weekend which also...


I would test the old remote again, see below, since the new universal remote may not be programmed correctly. Otherwise it can be the IR receiver in the TV.
Testing remote control:
The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera's Lens (Digital Camera can detect IR), you should see flashing light on the camera's screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals.
Parts: www.shopjimmy.com

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.

Apr 19, 2011 | Sharp LC-32SB23U 32 in. LCD TV

2 Answers

The power light blinks and the tv doesn't turn on


you should perform the initialization to factory defaults.

May 24, 2010 | Sharp LC-32SB23U 32 in. LCD TV

2 Answers

Where can I download a updated software driver for a sharp television model LC-32SB23U?


If you refering to firmware upgrade- there is non avalable for this model.

Nov 04, 2009 | Sharp LC-32SB23U 32 in. LCD TV

2 Answers

Can't Find the Operation Manual for Sharp LCD TV Model LC-32D47U


Try to download the manual from this link if your LCD is the LC-32SB23U.

Sep 19, 2009 | Sharp LC-32SB23U 32 in. LCD TV

1 Answer

Cannot turn off Closed Caption


Here's the copy on CC from my manual LC-32SB23U.

1. Press CC.
This will present the Closed Caption information display.
2. Press CC while the Closed Caption information is
still on the screen.
Press repeatedly until you select the desired closed
caption service.

INFO BOX ON THE SCREEN,
Air ANALOG
Audio : MONO
CC : 1/2 CC1 ------ Closed Caption information
Ratings : NONE

Example:
If a program has three services (Digital CC(ENG), CC1
and Text1), the closed caption display will toggle in this
sequence:
1/3 ENG -- 2/3 CC1 --- 3/3 Text1 -- Off
The CC button keeps a record of the last service
selected in its memory.
If the last closed caption mode (e.g. 1/3ENG) you
selected is not available for the next program, or on
another channel, the closed caption service that is
available is automatically selected, and this service
appears in parentheses, e.g. “1/3(CC1)”.
Closed Caption services that appear in parentheses will
not be stored in the CC button's memory as your last
selected service. Only services that you have selected
with the CC button are stored.


If this doesn't work, the TV may need a software upgrade.
I can get you a copy of my manual LC-32SB23U for you. But, are you sure there is and "A" in the middle of your model number?

Jun 02, 2009 | Sharp LC-32SB23U 32 in. LCD TV

1 Answer

Connecting external speakers to Sharp LC-32SB23U


Invest in a sharp soundbar (about $175.00) matchs the cecor of the TV fits right at the bottom and looks like part of the TV and the sound is super.

Jan 04, 2009 | Sharp Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73086 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

71288 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...