Question about Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

2 Answers

Cant replace belt on dysonDC07 - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Posted by on

  • Jerry May 11, 2010

    Are you saying you've tried to replace the belt but can't? Or you're needing to know how to replace it?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 83 Answers

It is difficult to replace the belt yourself and you need a special tool to access and remove the clutch (the belt sits around the clutch and the brushbar). The best solution is to call the Dyson Helpline, they will refer you to an authorized repair dealer in your area who will be able to refit a new belt for you.

Posted on Jul 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 171 Answers

Hi there SmartAlec from NelsonVacuums.com.au here. If you have a Dyson DC07 with a clutch you can find the belts on my website you cant get the clutch to brush belt from dyson but i stock them all the time. Hope this helps.

Posted on Aug 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dysondc07 will not move from the standing position


The most likely cause is something is stuck in the valve that switches the airflow from the floor to the tools as you pull the handle back.

Sep 30, 2013 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Replace belt


On that Eureka Canister, you're going to want to unscrew the cover on the base of the vacuum in order to gain access to the brushroll and belt. That vacuum takes a type EXT-U belt. Remove the brushroll and the old belt and stretch the new belt on using the brushroll. Click it into place and secure the cover back on.

Dec 12, 2011 | Eureka 3276AZ Pet Lover Bagless Upright...

1 Answer

Hi i have just been given a dysondc07 hepa could anyone tell me how to release the upright handle as to start hoovering it seems to be stuck upright thus unable to commence


Take off the power cord from its two hangers, depress the coloured clip above the power switch and the wand will lift out along with the back telescopic hose.

Oct 31, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

How do i replace the belt foe whirlwind vaccum


Remove 4 screws on top and top plate will lift up exposing the belt and roller. Make sure you remove hair and other debris before replacing.

Jul 15, 2010 | Eureka Whirlwind Litespeed 5740 Bagless...

1 Answer

Cant get it to spry solution on to carpet hose pluged if so how d


It is because the pump belt is worn or stretched. Here is the replacement you need:

Bissell Proheat Pump Belt

May 19, 2010 | Bissell PowerSteamer Deep Cleaner Plum...

1 Answer

When selecting the carpet cleaning mode, it appears the belt is slipping (due to the noise) over the drive pulley. How do you access the drive mechanism to replace belt or inspect drive pulley and belt...


On those units you must replace the clutch assy. you cant just replace the belt. there is also a special tool used to get the new belts on the brushbar. If you would like me to walk you through this repair let me know.

Feb 27, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Have dysonDC07 and can't get suction from floor beater


You need to replace the belt. Here is a link to belt you need and the manual which has instructions:

Dyson DC07 Manual

Dec 26, 2009 | Vacuums

2 Answers

Dyson dc rollerbrush is very weak


Hi.

Can you follow the belt to where it goes around motor shaft or does it disapear through a hole in the casing ?

If it does disapear then your machine has A clutch.
The clutched Dyson machines have 2 belts One is motor to clutch the 2nd is clutch to brush roller agitator.

You will need to replace 0ne or both belts if you have the clutched machine.

Now if you can see the belt going around the motor shaft you havent got the clutched type just replace this belt regardles of if you think its ok.

If you need further help please look at this site has manuals.

http://dysondc07.topcities.com

Mar 28, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Broken belt


Hi.

If you cant easily see how to replace the Belt then I think your Dc07 has A clutch unit.

This type of Dc07 has 2 belts one from motor to clutch & the second belt goes clutch to brush roller.

You will need to remove the clutch unit completey from the machine in order to replace the belts, Its alot to explain so try this site it has service manuals covering this.
http://dysonmanuals.llc.nu/

Jul 15, 2008 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Belt replacement


Hi.

You are correct there are 2 belts.
They can be tricky to replace most shops will state they cant be replaced & you require new clutch.
So try this site http://dysonmanuals.llc.nu/ for manuals on how to remove clutch unit & replace both belts they are very good with lots of high quality pics.

Chris..

Jan 26, 2008 | Dyson DC07 Bagless Upright Cyclonic Vacuum

Not finding what you are looking for?
Dyson DC17 Animal Bagless Upright Cyclonic Vacuum Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...