A HAVE A PROBLEM WHITH MY AC ER 5620 EXTENSA IT'S SHUTTING DOWN
IT's shsutting down and a blue screen appears with instruction that the system is sorry to shutting down and there is a problem with the new
installing software and when i desactevate the driver of the vga this problem desappear and the system is stable
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Shut the power down to the computer all the power and pull the power cord out, remove all usb devices except the mouse and keyboard, Turn the unit back on and see if this fixes the problem, if it doesn't then you will have to go into the computer and clear the c-mos this will allow you to get into the bios screen from there you can set up the computer again. Check you manual for the instructions on bios reset, most times it is just pins 2+3 that need to have a jumper installed to reset it. READ THE MANUAL PINS 2+3 APPEAR ON MANY THINGS ON THE CIRCUIT BOARD
Hi, You will need to enable the Advance power management in Bios and on windows.. Try to see in the bios the advance setting for APM. Some motherboard you have to enable this. Other its simply on windows. After the installation of windows Go >Right click desktop>properties>then select screen saver tab>below click power> Then click APM tab enable and restart May be this can solve this issues. Or else I would advice to change the power supply and see. Regards uttam
If you get a post screen that means the board is most likely fine, if its a desktop motherboard all you have to do to wipe the password is clear the cmos, like this >>>> if you don't have a jumper (the green plastic cap) then remove the battery for 10 mins, make sure there is no mains power connected, this should wipe the password and all you have to do is set the time and date and your ready to format and install an OS