Installation software I couldn't upload pictures because I don't have an installation software. Where can I get one?

Try putting the memory card in a USB card reader attached to your computer, which should see it as another drive. Write-protect the card first.

I can't get you the full instructions but I can offer some ideas which may help you. When you get into the machine (if the timing is still good) use a white or yellow grease pencil and make a mark across both gears as a reference point... then take a picture. When you start messing with gears it's really easy to get the machine horribly out of time. The reference point and picture will help you keep from getting it so far out of time.

I don't know if this will help you but here is a manual for your machine. I couldn't find an adjuster's manual.

http://www.singerco.com/uploads/download/652_288-974-972-244-2405-588-875-1195-3130-3140.pdf

Get this software and install on your pc. Use it to scan for the pictures then you can save them for use.

NOTE: Do let me know if you need help in installing or using it.

I don't know how long you had this problem nor when it started.
I don't know that it is a poblem, and I don't know if it can be fixed.
Too many variables: the camera, the USB plugs, the USB cable, the software, the possible interference, and so on.

Have you tried to upload the pictures and videos using a card reader?

Hi, I'd suggest getting a card reader and using that to get photos off as then you don't need any specific software.

I have a problem in installing the software on the windows vista, I got a message saying "your current ActiveX controls could not be displayed" I changed the security settings to accept websites with unknown signatures but it didn't solve the problem. Please, do you have a solution to this problem!

Any "firmware update" is performed by downloading the firmware to a computer (usually running Microsoft Windows) from the Internet, and then using software on the computer to "upload" the firmware to the printer. So, can you borrow a laptop computer running Windows, and connect it to your network, to be able to do the download/upload ?

Hi!

here's how:
Log in on facebook... click on profile....select Photos tab.. Click the "+ Create a Photo Album" button....Enter the name for the Album and click "Create Album"..... the best so far and the fastest to upload pictures to facebook is by using the "Simple Uploader... Click the :Try the simple uploader button, just under the "CANCEL" button....browse the picture from your PC, and select 5 of this to Upload. Check the box for terms of use and click Upload Photos...
That it.. its simple.

However, on some occasion this will not upload pictures with larger size....My suggestion to you is to download Image Resizer software... Install this software to your computer... To use this.. find your pictures and right click to it.. Click the resize picture and it will copy with a smaller size (pictures with 2mb will resize to almost 80 kb... then select all pictures with lesser size and let this be the one to be uploaded..



Hope this help.
Much appreciated if you rate this help.. thanks

You need to install the software for your camera and allow it to start when windows starts. That way, your pictures from your camera will be uploaded as soon as you connect it to your computer. Or try also to start the camera software and plug the camera to automatically upload images. To automate it, you need the software to run when windows starts. Simply add the software at system startup.

im not sure if this camera needs software. but if it does i would look for the installation software online. like you said all the digi cams i have had before needed software.