Question about OKI MICROLINE 520 Matrix Printer
You can get any driver you want by installing : Driver Genius - the latest version .. and let it search through the internet :)
btw , here's a ( worked & safe ) link for D.G :
Hope that link helps too :
Good luck :)
Posted on Jan 10, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
To change the settings, make sure you have a good ribbon installed.
Press the MODE button. The SEL light will go out. Menu light will come on.
Press the GROUP button until the printer prints something like:
Serial Interface Parity None
To change the Parity, press SET. A new line will print as:
Serial Interface Parity Odd
Press SET until the Item is the one you want.
Then Press the ITEM button. It will then print:
Serial Interface Serial Data 7 or 8 bits 8
Again if you want to change it, press SET. Otherwise go to the next Item.
Continue using the ITEM button to choose the item you want to review or change and the SET button to change the selection.
When you have made all the changes verify by going through all of the items with the ITEM button. When you are satisfied, Press the MODE button to save all of the changes. (The Menu light will go out.)
If you have any trouble Comment back.
Thanks for using Fixya.
Posted on Aug 27, 2009
Tips for a great answer:
Dec 08, 2015 | OKI MICROLINE 520 Matrix Printer
Dec 09, 2010 | OKI MICROLINE 520 Matrix Printer
Dec 08, 2010 | OKI MICROLINE 520 Matrix Printer
Jan 04, 2010 | OKI MICROLINE 520 Matrix Printer
Mar 27, 2009 | OKI MICROLINE 520 Matrix Printer
Jan 10, 2011 | OKI MICROLINE 520 Matrix Printer
122 people viewed this question
Usually answered in minutes!