Question about Samsung ML-6510ND Mono Laser Printer Page Printers Mono A4

Open Question

How to Reset Samsung ML-6510ND to Factory Defaults?

Hi there, Question> Does anyone know how to restore a Samsung ML-6510ND printer back to factory default settings? Reason> The login details for the SyncThru web-admin was lost. Attempted> I tried using the following account details to no avail: username: admin password: sec00000 username: admin password: admin username: *blank* password: *last 8 digits of mac address* Also contacted Samsung Support and tried the following suggested fix but to no avail: ***** As per our chat conversation today, please turn off the power switch at the back of the unit, plug and unplug it. Once you have done this, kindly try to the printer reset again. If you will reset the printer, you will lose all pending faxes, preset settings and speed dials etc. To do this, please follow these steps: 1. Disconnect the power from the device. 2. With the power disconnected, hold down the ''Stop'' button. 3. While holding down the ''Stop'' button, plug the power back and do not let go of the ''Stop'' button. 4. Once the display screen shows ''Australia'', you can then let go of the ''Stop'' button. 5. Then press the ''Start'' or ''Enter'' button. It will then say clearing memory. ***** Any ideas? Thanks in advance.

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: installation samsung 4300 printer in ubuntu 8.10LTX

did you checked port settings on linux control panel and printer settings ?

Posted on Jan 07, 2010

Ad
  • 1 Answer

SOURCE: Email Address Problems

You must enter a DNS server on the "Network Settings > TCP / IP" page. If you're unsure of it, try copying your default gateway.

Posted on Jul 13, 2010

  • 1 Answer

SOURCE: Default login for samsung syncthru

the username is
Admin
Password is
sec00000

Posted on Aug 06, 2010

  • 1570 Answers

SOURCE: I have a Samsung SCX-482FN

Hi

Did you try to set up again the printer once more if not, please set up or add the printer once more.

Please let me know if you need more help.

Posted on Apr 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error remove and check cartridge on right


In the online manual for the printer we can see how to do the restore factory settings reset.
Press setup > Press 6 > Press 3
This displays the tools menu. Select the restore factory defaults.
http://h10032.www1.hp.com/ctg/Manual/c00241244.pdf
In this link we can see how to perform a partial reset. Take out the ink cartridges before this one.
Unplug the power cord from the back of the printer while the printer is turned on > wait about 30 seconds > Press and hold the # and the 3 > reconnect the power cord to the back of the printer while still holding the # and 3 buttons > release # and 3 after the printers starts to boot up. Insert ink cartridges when the printer asks for them.
HP Customer Support

Apr 13, 2016 | HP OfficeJet Office Equipment & Supplies

1 Answer

Go back factory condition


Hello Cynthia,
There are several ways to achieve this.
Reset phone
The Reset feature allows you to set your phone options back to
the factory defaults.
  1. From Idle mode, touch Menu-> Settings -> Phone -> Reset phone.
  2. At the "All settings reset to factory defaults. Continue?" prompt, touch Yes to reset, or No to cancel. Once your phone has been reset to its default settings for those selected options, it will restart itself in order to incorporate the new settings.
Restore phone
The Restore feature allows you to delete any user information
that has been added, in addition to setting your phone options
back to the factory defaults.
  1. From Idle mode, touch Menu-> Settings -> Phone ->Restore phone.
  2. At the "All settings reset to factory defaults and all user data will be deleted. Continue?" prompt, touch Yes to reset, or No to cancel.
or
Reset code
Enter *2767*3855# in phone dial.

Warning! All your data including contacts, messages etc. will be lost! Copy all your necessary data/Contacts/Messages etc. to SIM or make backup on your PC before full reset!

Dec 06, 2013 | Samsung SGH-A877 Impression Cell Phone

1 Answer

Reset printer


On your printer, go to the settings menu -> factory defaults.

Do not restore - this is the factory default setting. Do not restore keeps the user defined settings.

Restore - returns all printer settings to the factory default settings except the Network/Ports menu settings. All downloads stored in RAM are deleted.

Jun 04, 2012 | Lexmark X204n Multifunction Printer,...

1 Answer

I need the key combination to do a full reset on a Lexmark x6675 - can anyone help? Thanks in advance for any assistance forthcoming - Jeff


From the printer control panel, press Setup button > Defaults, press OK > Set Defaults, press OK > Use Factory, press OK. You will then be asked to select/enter your preferred printer settings just like the first you set it.
Source: How to Reset the X5600 and X6600 Series Printers to Factory Defaults

Jul 26, 2011 | Lexmark X6675 All-In-One InkJet Printer

1 Answer

How do I do a reset


This printer doesn't support a COLD RESET
However it will set customer accessible menu settings back to factory default settings

Restoring the factory-set defaults returns all of the settings to the factory defaults.
To restore the factory-set defaults
1. Use the (Left arrow) or the (Right arrow) button to select Service, and then press
(Select).
2. Use the (Left arrow) or the (Right arrow) button to select Restore defaults, and then
press (Select).
The device automatically restarts.

Feb 09, 2011 | HP LaserJet 2605dn Printer

1 Answer

Changed ink, cleaned cartridge area, turned printer on and off, still have an error code 1203. what is my next step?


Hi there can only try and I hope it will do the job for you.

Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...

1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.


Or try
Reset Factory Defaults on the Dell™ 962 Printer
To reset factory defaults on the printer, perform the following steps:
  1. Press the Mode button several times until the Copy LED is lit.

  2. Press the Menu button until Set Defaults is displayed, then press the Select button.

  3. Press the right arrow button until Restore Factory Defaults is displayed, then press the Select button. The printer will ask for the date, time and language.

  4. Enter the time, date and language, the press the Select button.

Reset Factory Defaults on the Dell™ 962 Printer
To reset factory defaults on the printer, perform the following steps:
  1. Press the Mode button several times until the Copy LED is lit.

  2. Press the Menu button until Set Defaults is displayed, then press the Select button.

  3. Press the right arrow button until Restore Factory Defaults is displayed, then press the Select button. The printer will ask for the date, time and language.

  4. Enter the time, date and language, the press the Select button.


Reset Factory Defaults on the Dell™ 962 Printer
To reset factory defaults on the printer, perform the following steps:
  1. Press the Mode button several times until the Copy LED is lit.

  2. Press the Menu button until Set Defaults is displayed, then press the Select button.

  3. Press the right arrow button until Restore Factory Defaults is displayed, then press the Select button. The printer will ask for the date, time and language.

  4. Enter the time, date and language, the press the Select button.


Reset Factory Defaults on the Dell™ 962 Printer
To reset factory defaults on the printer, perform the following steps:
  1. Press the Mode button several times until the Copy LED is lit.
  2. Press the Menu button until Set Defaults is displayed, then press the Select button.
  3. Press the right arrow button until Restore Factory Defaults is displayed, then press the Select button. The printer will ask for the date, time and language.
Enter the time, date and language, the press the Select button.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Feb 15, 2010 | Dell 962 Photo All-In-One InkJet Printer

5 Answers

Toner exhausted


open the back cover and locate the chip numbered 93c66,its above the USB port on the mainboard.short the top-left and bottom left pins and turn the printer on for 5-10 secs...that resets the page count to 0... also either remove the chip on the toner or cover it with a cellotape

Sep 01, 2009 | Samsung SCX-4300 Monochrome Laser...

1 Answer

ML-2010


Power recycle the unit. Power it off and unplug it for 30 secs. Then Plug-in back the power. Press and old the on switch and the form advance button at the sametime for 15 secs. Or one of the other buttons. But try each one what you're trying to do is reset the printer back to factory defaults.

Jul 24, 2008 | Samsung ML 2010 Laser Printer

Not finding what you are looking for?
Samsung ML-6510ND Mono Laser Printer Page Printers Mono A4 Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...