Question about Sub-Zero 700TR

1 Answer

Sub zero 700 TR error code 06

Whats does an error code 06 on a sub zero 700 TR mean?

Posted by on

  • steveinsocal Jan 27, 2009

    It worked but a few days later the error coed returned and i did notice the temp was erratic. So it looks like I need a service call. They'll be here today. I'll let you know the diagnosis.



    Thanks again

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 56 Answers

Error code six means: from SZ
Refrig. evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s
Erratic temp can be many things such as an open door. Clear the code by holding the bell key for 15-30 seconds or until you hear a tone. Keep an eye on your temps for a couple of days. If it comes back its time to call a service tech. If you are in OC I have the number of the best tech for Sub Zero in all of SoCal. There is more tests that can be done depending on how tech savvy you are.

Posted on Jan 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What dose it mean AE6 error code in Samsung wash machine


SAMSUNG WASHER FAULT CODES: AE or AE6
SAMSUNG WASHER ERROR DEFINITION = communication errors sub and main PBAs - main and inverter PBAs
AE and AE6 represent communication errors between the sub and main PBAs or the main and inverter PBAs.
HOW TO REPAIR/CLEAR ERROR?: If either of these errors is displayed, troubleshooting is needed or service is required.

http://removeandreplace.com/2016/06/15/samsung-washer-quick-troubleshooting-guide-error-code-definitions/

Feb 17, 2017 | Samsung Washing Machines

1 Answer

In the control panel apear two bars like this - -


You have a code error that needs to be fixed. Call either your mfr or refer to manual or google the problem , include. Model # and code .

Feb 07, 2013 | Sub-Zero 700 Refrigerator Freezer...

1 Answer

"service" flashing also what seems to be an error


Service flashing- 1. Ice maker not working 2, Rise in temperature 3. Condenser needs cleaning
To Clean Condenser 1. Remove Grille 2. Brush with a soft brush 3. Vacuum being careful not to bend fins.

Jul 07, 2011 | Sub-Zero 650/SRH Stainless Steel

2 Answers

My 632 is flashing EC 40. What is the problem?


Here's a list of all error codes for the 600-series Sub-Zeros.
http://fixitnow.com/wp/2006/06/29/error-codes-for-the-sub-zero-600-series-refrigerators/

EC40 = Excessive Freezer Compressor Run

Mar 24, 2011 | Sub-Zero 632 / S

1 Answer

Service light is blinking & code 06 EC flashes on Sub Zero 650


Turned the breaker off to the fridge for 15 minutes and turned it back on.

Jan 01, 2010 | Sub-Zero 650 / O Bottom Freezer...

1 Answer

Sub-Zero service manual


Here is a link to the error codes. If there is a fault condition these should be flashing on the display:

http://fixitnow.com/wp/2006/06/29/error-codes-for-the-sub-zero-600-series-refrigerators/

One this to try is a hard reset: unplug and wait for a few minutes and re-plug back in. Sometime this resets the service condition and will then display the error codes.

Ice is displayed when the ice maker is turned on. Press the ice on/off and it should turn off.

Feb 19, 2009 | Sub-Zero 642

1 Answer

06 error code ice build up on back wall


Defrost heater or defrost timmer not working.

Jul 07, 2008 | Sub-Zero Refrigerators

2 Answers

Service code EC?


CODE INDICATION
05 Refrig. Cabinet Thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s
06 Refrig. Evaporator Thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s
07 Freezer Cabinet Thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s
08 Freezer Evaporator Thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s
20 Defrost Under-heat with No Voltage Feedback Through Gray/White Wire at Defrost Start
21 Defrost Overheat
22 No Voltage Feedback Through Gray/White Wire at Defrost Start
23 Defrost Overheat with No Voltage Feedback through Gray/White Wire at Defrost Start
24 Defrost Under-heat
30 Excessive Icemaker Water Valve Solenoid Activation (Exceeded 15 Seconds)
40 Excessive Freezer Compressor Run
50 Excessive Refrigerator Compressor Run

Jan 21, 2008 | Sub-Zero 632 / S

Not finding what you are looking for?
Refrigerators Logo

648 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sub-Zero Refrigerators Experts

ACME Sub Zero...
ACME Sub Zero...

Level 2 Expert

41 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Sub-Zero Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...