Question about Linksys Wireless-G WRT54GS Router (e125894)
I have forgotten my passphrase.Please sendit to me as soon as possible
Ummm ...how can we know what passphrase you set on your router? .... lol
Find the reset button ...it will no doubt be behind a little hole in the case somewhere that you have to stick a pin in to press it.
This will set the router back to factory defaults with no security set. Then you can enter a new passphrase.
Posted on Jan 21, 2009
Tips for a great answer:
Feb 17, 2013 | Routers
Jul 19, 2012 | Gateway Routers
May 05, 2011 | Routers
Mar 28, 2011 | Cisco - Linksys Wireless-n Home Router -...
Feb 26, 2011 | Routers
Restoring factory defaults on a device will erase any customizations you have made. You will lose any configurations saved to the device!
From the center screen, select your encryption type from under the Security Options heading.
If the wireless network passphrase is visible, review it and use it to log devices onto your network.
If it is not visible, you can change your wireless passphrase; however, changing the passphrase will cause you to lose your wireless connection. Connect your computer to the router with an Ethernet cable before entering a new passphrase into the text box and clicking Apply.
hope this helps
Nov 11, 2010 | NetGear Wireless router EN Fast EN
Depending on the router, you can either view or reset the wireless network password (also referred to as the passphrase or security key) if
you can log into the router. Some routers mask the wireless network
password, so while you cannot recover it, you can enter and save a new
If you cannot log into your router because you have
forgotten the router password or your network has been hijacked, please
refer to "Lost or forgotten password for router or other device" below.
To view or reset a wireless network password:
Unfortunately, there is no way to recover a lost or
forgotten password from a router or access point; you will need to
reset the device to factory defaults. However, once the device is reset
to factory defaults, you can use the default username ("admin") and
password (either "password" or "1234" depending on your router) to
reconfigure your router settings.
NOTE: Restoring factory defaults
on a device will erase any customizations you have made. You will lose
any configurations saved to the device!
See the following articles for more information:
Nov 07, 2010 | NetGear WIRELESS-G WGR614 802.11G WIRELESS...
Aug 10, 2010 | Routers
Feb 08, 2010 | Belkin (F5D72304F5D7000) Router
Aug 25, 2008 | Routers
143 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: