Question about Krell Home Theater Standard 7.1 7.1-Channel Amplifier

Open Question

Krell hts pre amp 7.1 standerd.menu will not program my setup?

Hi, I just brought a used krell pre amp and krell kav-500 amp.I have reset the pre amp back to the defaults settings.That as far as I get.I have the manuel and I see what should come up .The small window just says menu mode.? I have called krell but they did not call me back.I have bw speakers,and also the center chanal does not have any voice?The two sides speakers play well along with the sub-

Posted by on

6 Suggested Answers

  • 31 Answers

SOURCE: krell 250a power amp

Hi There WLAW,
I am in Auckland NZ and do repair work for a high quality Amplifier chain so I could have a look at yours for you....

Being Local in Auckland it will save you sending it away off shore to Australia.

Cheers From YUBEUT (09) 357 7496

Posted on Dec 26, 2007

jomabug76
  • 1146 Answers

SOURCE: Just stopped working. Checked connections and power button no luck

take off the lid and check the fuse,,,

Posted on May 17, 2009

  • 12 Answers

SOURCE: krell kav 250A blows internal fuse

hi please check the wiring of the output it could be short or the speaker would be short or it could be the diode at the secondary supply that had short or capacitor disconnect the power supply ans check the OHMS of the transformer .or check the transistor could be stort

Posted on Nov 17, 2009

dunnbiker
  • 8546 Answers

SOURCE: Hi, Will the krell kav 500i work on 220v 50hz

If it has a voltage selector for 220v, once configured it will work just fine Being electronic instead of mechanical the power frequency won't affect it. If it doesn't have a voltage selctor, don't plug it into 220.

Posted on Dec 26, 2009

supertech6
  • 513 Answers

SOURCE: Hello, after plugging on Ipod through my preamp

Sounds like the volume was way up when the iPod turned on. iPods are DC and cause a sudden thump through the speakers when they power on.
If the fuse is not blown, there may be another fuse you have not seen. Most amps have three to five fuses especially a 150watt/channel like the Krell.

Posted on Apr 17, 2010

petraman7
  • 1175 Answers

SOURCE: Not enough bass response, how do I increase the bass?

Check the Krell website

Posted on Apr 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Parts included with new amp in box


You should be able to figur that out but first read the instructions they contain some amazing information. I can not help you because I have no idea of what you are asking.

Oct 05, 2014 | Krell KAV-300i 2-Channel Amplifier

1 Answer

Hi, I have to replace all the 20 transistor of my krell kst-100 power amplifier- wich are the best choice? model and company? maybe mj21195g and 6 from onsemi?


Onsemi ( which is motorola) is a good pic for replacements If youre looking at the 21195 , then there must be a compliment to that as well? 21194 or 21196

Oct 10, 2010 | Krell KAV-300i 2-Channel Amplifier

1 Answer

Hello If i wanted to refresh my Krell KAV-300i what parts should i change out? Thanks :)


Can you please provide more information about what you mean by "refresh"? Is there a performance problem or funcitonal problem with the unit?

Thanks,
Dan

Aug 16, 2010 | Krell KAV-300i 2-Channel Amplifier

1 Answer

Hello, after plugging on Ipod through my preamp hooked through my krell kav 300 integrated amp I heard a super loud noise and lost power. I examined the fuse and it looks fine. What do I do?


Sounds like the volume was way up when the iPod turned on. iPods are DC and cause a sudden thump through the speakers when they power on.
If the fuse is not blown, there may be another fuse you have not seen. Most amps have three to five fuses especially a 150watt/channel like the Krell.

Apr 17, 2010 | Krell KAV-300i 2-Channel Amplifier

1 Answer

Hi, Will the krell kav 500i work on 220v 50hz supply? Thanks


If it has a voltage selector for 220v, once configured it will work just fine Being electronic instead of mechanical the power frequency won't affect it. If it doesn't have a voltage selctor, don't plug it into 220.

Dec 26, 2009 | Krell Amplifiers & Preamps

2 Answers

Krell kav 250A blows internal fuse


hi please check the wiring of the output it could be short or the speaker would be short or it could be the diode at the secondary supply that had short or capacitor disconnect the power supply ans check the OHMS of the transformer .or check the transistor could be stort

Nov 17, 2009 | Amplifiers & Preamps

2 Answers

Krell kav300i, increasing volume by itself.


That is an extremely odd problem. I suggest finding a tech in your area who is familiar with the unit, or contacting krell directly.

Sep 21, 2008 | Krell KAV-300i 2-Channel Amplifier

Not finding what you are looking for?
Krell Home Theater Standard 7.1 7.1-Channel Amplifier Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Krell Amplifiers & Preamps Experts

80stech

Level 2 Expert

92 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

 Grubhead
Grubhead

Level 3 Expert

4576 Answers

Are you a Krell Amplifier and Preamp Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...