Question about Computers & Internet

1 Answer

Hello I'm using a hp compact nc6320 and my sensor

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Do you use an external mouse or the built in touchpad/pointing stick? If you use an external mouse try another and see if the random movement disappears.
If you are using the touchpad/pointing stick for day to day use, plug in a mouse if you have one spare, go to the control panel in whatever version of MS Windows the laptop is running and do the following:Start Button > control panel > mouse (goto the hardware tab on the window that opens) choose the 'synaptics' device > properties > driver > choose 'disable' then ok. This should disable the touchpad if the random jumping stops then it is probably a physical problem with the touchpad/pointing stick, you may want to contact HP and request a repair.

Link below is to manuals for your laptop model:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=64179&taskId=135&prodTypeId=321957&prodSeriesId=1839146



Good Luck

Posted on Jan 11, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i use bio metric censer in hp Compaq nc6320


To use the Biometric fingerprint sensor, just swipe your finger across the reader and it should start the enrol program.

See the video on this page Using Fingerprint Reader with DigitalPersona or Verisoft

Oct 10, 2014 | Computers & Internet

1 Answer

Where can the bios chip be found on a hp compaq nc6320 laptop.


Hello Daniel,
I have included a link to an image of the mainboard for your laptop. It clearly shows (with arrows) where the bios chip is located.
http://bios-repair.co.uk/images/Laptops/HP/Notebook/NC6320-Mainboard.jpg
Hope this Helps!
Joe

Apr 27, 2013 | Computers & Internet

1 Answer

Stationed in Afghanistan. Have a HP NC6320. Fan runs, no post beep or video output. Replaced CPU, RAM, HDD.


Hello Stephen
The problem could be with your SMPS which might not be providing 5 Volts to check the Power Good State of the Devices.
Let me know if you have changed the UPS.

Rgds,
Prashanth.

Jul 22, 2011 | HP 413670-001 - HP Compaq nc6320, nx6310,...

1 Answer

My nc6320 fingerprint recognition sensor is not working?


i found this at HP Compact web site, and without more information, and since I'm not familiar with your model, it's all I could find. Hope this helps, and good luck. - jmattes http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=1839146&prodTypeId=321957&prodSeriesId=1839146&objectID=c00901059

Oct 24, 2009 | HP Compaq nc6320 Notebook

4 Answers

Can't reinstall xp pro on my hp compaq nc6320


Stephane, I ran into the same problem after wiping out my Compaq nc6320 and trying to install XP Pro. The fix is to disable SATA Native mode. To do this: Enter F10 Setup then System Configuration>Device Configurations>SATA Native Mode and disable it, save the changes and now you should be able to install XP Pro. Remember, when I did this the drive was blank, I don't know if that makes a difference or not. Best of luck! Bryan P.S. If you want to enable SATA native mode after you have installed XP Pro check out this link: http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1042050&admit=-682735245+1161793137260+28353475

Oct 04, 2006 | HP Compaq nc6320 Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...