Reboot (091-321) what can i do if i found this. I'm so confused

You can try shutting off the breaker for 5 minutes. The electronic control may have gotten "confused" and needs a reboot. Let me know if that doesn't fix it.

First - re-seat the harddisk and reboot the computer. If the computer does not boot up then reboot andgo into the BIOS configuration to see if the BIOS detects the hard drive. If itdoesn't detect the hard drive then it could be faulty.
Then the hard drive needsto be replaced in the computer/laptop, Windows installed and the computer orlaptop's device drivers plus your programs etc. to get a functioningcomputer/laptop again.

Make sure that you're using genuine Lexmark cartridges. If you are, try updating the firmware of your printer. Just go to http://bit.ly/ghfW8H to download the firmware update.

Reseat the printead again and the cartridges then reboot the printer. If it doesn't help, try replacing the cartridge.

I have found the Toshiba line very durable, but if you are going to buy one don't buy the low end, like any other brand you will get what you pay for, so go high quality and you will get your money's worth.

did it just turn off or what?

The 404 or Not Found error message is a HTTP standard response code indicating that the client was able to communicate with the server, but the server could not find what was requested. A 404 error should not be confused with "server not found" or similar errors, in which a connection to the destination server could not be made at all. A 404 error indicates that the requested resource may be available again in the future.

I'm as confused as you are. Pick a different GOOD system restore OR go back to where it was before. Uninstall Keyboard in Devices and the reboot and let it reinstall. If the keyboard is bad replace it. They run $20.00 on ebay shipped and Youtube can show you how. 15 to 20 minute repair.

Good luck.

Zoom X6 routers don't work with either Kindles or Nooks- it seems the connect on demand to save power confuses the Zoom router - typically requiring the unpractical fix of rebooting the router every two minutes.

go to the bios setup and set the system bios default and restart. bye