Question about Canon PIXMA iP1600 Printer

1 Answer

Waste ink absorber is full

What do I do when the printer says the waste ink absorber is almost full?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 51 Answers

Ink Absorber Replacement Options: Info can be found HERE !!Read Thouroughly!!

!!! READ Carefully the options Listed at Canon's Website
!!! in the Link Above BEFORE looking at the following Links:

-FixYa- Troubleshooting Topic (Same concerning Topic) with (SOME) useful information on your above concern.

  • [ Mostly Temp Fixes ] -in The Above Link. And there Are procedures for these, described there as well.
Actual DIY Procedure: I found this on Yahoo!Answers. BE ADVISED. Hopefully you've READ ALL the info regarding the Ink Absorber Replacement Options in the info Link I provided Again Just now, and above (AT CANON's Website)

I'm only providing some incite and knowledge as to what your options are, and, I, am not to be held responsible for any damage that may be done to your printer in the event of you Attempting the DIY Procedure.

I Hope This Helps.
&
I hope All Goes Well.

Posted on Jan 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A printer,s ink pad is at the end of its service life


This means the waste ink collection sponge is full. This counter can be reset but it is strongly recommended to replace the ink pad as you will end up with a large amount of ink spilt on your desk if you continue to use the printer after the pads lifespan. It can be quite a large job to change depending on the model. If the printer is not an expensive model it may be more cost effective and less messy to simply replace it with a similar model.

Jan 14, 2017 | The Office Equipment & Supplies

1 Answer

5C00 Error Code as well as yellow and green alternating lights


To fix this error is much easier than it looks. Unplug the printer power. Move the ink cartridge cradle to the left. Over to the right you will see a small pad about 1cm square. This pad and the area around should be covered with ink. Get a cloth and press down on this pad - it's not fixed so should come away with the cloth, otherwise use tweezers gently. Squeeze the pad several times between your thumb and forefinger while inside the microfibre cloth to remove ink build up. Then when not much ink comes out on the cloth, clean the area in the printer around the pad so that looks free from ink too. Then position the pad back in place, move the cradle back into position, plug in and switch on - should work fine now.

Jan 14, 2017 | Office Equipment & Supplies

1 Answer

Bizhub C250 using to much toner. Images are very dark. Ink can even be rubbed off pages. How do you adjust?


Check that the fuser is not in enevople mode. two green handle up not down. check the files

Oct 28, 2016 | Konica Minolta bizhub C250 All-In-One...

1 Answer

My printer brother dcp7065dn disply 71 and72 error


This is codes for the ink cartridge. The code means there is a problem with the cartridge. Change them both and restart the machine.

Jan 13, 2015 | Office Equipment & Supplies

1 Answer

B&w/gray Scanning Is Okay But Color Scanning Problem


Run ink head cleaner routine. If you cannot the list make and model of printer. Thanks.

Dec 25, 2014 | Office Equipment & Supplies

3 Answers

My Epson WF-3640 is printing with gaps in the text. How do I fix this issue?


Make sure you should remove shipping tape from the ink cartridge. These taps are used to protect printer during shipping but you have to remove it before starting printing. Beacuse these taps prevent the ink to entering in print head. If you will not found shipping tape in your printer then there is terr off strip, remove it. The tear off strip seals the the vent holes on the top of the cartridge to prevent it from drying out on the shelf or during shipping.
After ensuring that the shipping tape has been removed, run the printer's "Head Cleaning" utility to prime the cartridge, then print a test page.
See full detail at- http://guideusermanual.com/product-name-workforce-wf-3640-manual&po=152836&lang=English

Sep 18, 2014 | Epson WorkForce WF-3640 Wireless Color...

1 Answer

How to clean ink absorber for canon mp237


First of all open the ink cartridge of your printer.
When the ink cartridge would move all the way over, then disconnect the power cord of your printer.
Now pull the frame of rubber from the printer and remove ink pads.
To clean ink pads you may place them in a bowl having warm water and start rubbing and squeezing them to clean it from ink.
After removal of ink, keep the pads separate for dry.
When the pads get dry completely, place them back in rubber frame.
Reinstall the rubber frame in your printer.
For deep guide and support refer to-
Canon Pixma Mp237 Manual

Oct 07, 2013 | Canon PIXMA MP230 Multifunction color...

6 Answers

Printer won't recognize cartridge


I had the same problem. I'm not sure but I think I replaced the cartridges when the printer was on because I turned the printer off and removed one of the cartridges. When I turned the printer back on it recognized that cartridge but not the others. I turned the printer off again, rmoved all cartiridges and put them back in when the printer was still off. When I turned the printer on again I had no problems. So...try turning off the printer, rmove all cartridges, then put them back in and restart printer. Hope this works for you .

Nov 28, 2007 | Epson Stylus 2200 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA iP1600 Printer Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

101609 Answers

old marine
old marine

Level 3 Expert

1710 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...