Question about Bulova Watch

Open Question

Setting time & date on speedo watch

I have a speedo SOLSP3 watch that i can not set the date or time on, the instructions are very vague. my fingers are hurtign from pressing the buttons.
please help :)

Posted by on

  • wherzmysocs Mar 02, 2009

    i've got the same problem! Really, didn't anyone keep their instructions? If so, please help!

  • Anonymous May 05, 2009

    I can't find it out...

×

6 Suggested Answers

  • 4 Answers

SOURCE: Setting time & date on Philippe Starck Fossile watch ph1080

hold the left, bottom button (marked ....) for a few seconds....then press the top right button (marked with 1 dot) to change between the hour, minute, date etc. use the bottom right button to advance the flashing number, and when finished setting time and date, use the bottom left button to stop the numbers flashing and return the watch to normal. hope this helps, this is also how to change the date for the other question asker (works on 2 other starck/fossil watches i have and i assume the controls are the same).

Posted on Dec 02, 2008

  • 1 Answer

SOURCE: how to set up ladies roxy digital watch

I found users instructions on roxy website at:
http://www.roxy.com/search/index.jsp?f=Taxonomy%2FROXY%2F2818169&categoryId=2818071&f=Taxonomy%2FROXY%2F2818071&fbc=1&fbn=Taxonomy|Watches&fbx=0

We were able to program our watch completely!!!

If you look on the back of the watch that you bought on the metal plate, it tells you the style. Ours was the Roxy 70's digital watch, and I found specific instructions at (even if this is not your style, the instructions may work):
http://www.roxy.com/graphics/uc/roxy/manuals/Roxy_manual_watch_70s.pdf

Posted on Dec 23, 2008

  • 2 Answers

SOURCE: Rolex oyster perpetual datejust time/date setting instructions

unscrew the winding pin until it opens to the first position. (this position is for self winding. approx 30 turns clockwise will fully wind the watch)pull pin to the next position. this sets the date if it is a quickset. 1985 to present. again turn clockwise to the desired date is present. pull the pin to the final position and this will set the time turning clockwise as well. hope this helps.

Posted on Jan 05, 2009

  • 1 Answer

SOURCE: Need help with Kenneth Cole Reaction Watch - setting date/time.

for a watch face that has a day of week, date, and moon calendar: There are two click points on the set-pin. pull out 1 click to access date/moon calendar; spin clockwise to set the moon calendar. spin counterclockwise to set date.

pull out pin 2 clicks to set time, just like any other watch

Posted on Sep 05, 2009

  • 1 Answer

SOURCE: Watch setting instructions SEIKO 7N43 8A39 "A1"

If you are still wondering about this, pull the knob out to the first click. turn one way to set day, turn the other way to set date. Pull out further to set time.

Posted on Mar 09, 2010

fairyandtrol
  • 50 Answers

SOURCE: Need instructions for setting a Sharp watch model # 2092

All the settings seem to go through the start/stop button. If you hold it down for 3 (not 2, not 4, but 3) seconds, it toggles in and out of "set the watch mode". You can tell you are in it because the seconds at the bottom go all blinky. Use (quick press) start/stop to move from seconds, to minutes, to hours, to year, to month, to day. Mode subtracts, reset adds. To set alarms, etc, first put the watch into Alarm Mode (Mode button, again).
Use the reset button to move to the selected alarm (1-5).
Hold the start/stop button for 3 seconds to toggle into "set the alarm mode".
Quick press of start/stop moves between things to set (kind of alarm, hours, minutes).
Mode subtracts, reset adds.
3 second hold of start/stop takes you out of setting mode.

Posted on Nov 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Setting intercrew led time and date


Instructions for Intercrew LED
Press A (Top Left) once
Press D (Bottom Right)
It should start flashing
Press B (Top Left) to adjust
Press D (Bottom left) to move thru time,date ect.


523466b1-2443-4ec2-9dea-eeebac491068.png

Sep 08, 2012 | Watches

1 Answer

I cannot set the time on a wr165


here's a simple instructions of setting your watch


Watch setup instructions
for the Armitron Instalite All-Sport :

Mode B / \ C Date
' '
Light A \ / D Alarm

_____________________________________

Set time time / date

Press and hold B (Mode) untill alarm hours flash
Press D (Alarm) to advance these

Press B (Mode) again, seconds will flash,
press D (Alarm) to advance these

Press C (Date), minutes flash, press D to advance these

Press C again, hours flash, press D to advance these

Press C again, month flashes, press D to advance these

Press C again, Date flashes, press D to advance these

Press C again, Date flashes, press D to advance...... [suggestion from Chikita]]

Activating/Deactivating Hourly Chime

1. From "Normal Time Mode", press and hold "D" (Alarm) and
at the same time press "C" (Date) once. Hourly chime symbol,
( a house shape) appears in "chime" windows to indicate
the hourly chime will beep every hour.

Activatin/Deactivating Alarm

2. With "D" (Alarm) still pressed, press "C" (Date) again. Alarm symbol
( a clock shape with waves above it) appears in the
upper right to indicate the 24 hour alarm is now activated.

[I assume this "toggles" between off and on states,
so performing it again should turn off the alarm]
i hope this will help you.

Jul 22, 2011 | Armitron All Sport Digital watch

1 Answer

Instructions for Armitron All Sport 40/6623 time setting needed.


Here's how you set the 40/6623 M175 for anything. I figured it all out with help from here :). Okay so want to set the alarm? Press MODE once. Then hold it. And use the DATE and ALARM buttons to set the alarm. Press MODE twice and you're done. To set time do the step before this and press MODE once. Use the DATE and ALARM button to set the time. As for the 24 hr deal what you do is hold ALARM and press MODE or hold MODE and press DATE. To turn alarm on/off hold ALARM button and then press the DATE button. To set the date go to time set mode and keep cycling between the hours and mins until you get to the date :). That's all you gotta do :D. I know many of you need the instructions so here it is!!

Apr 02, 2011 | Armitron Digital Sport 406623BLK Watch

1 Answer

I have bought a couple of lupo watches but there are no instructions so I dont know how to set them to the correct time can you help


This LUPO anion watch emits negative ions and infrared which make you calm. It soothes and relaxes your mind. How to set the time and date: This unique watch can display month, date, time & minute. 1.Press A button twice. (Date and Time displays when press once) 2.When the month figure appears, press M to set the month. 3.Press A button once again, the date figure appears and press M to adjust the date. 4. Press A button once again, the hour figure appears and press M to set the time. 5.Press A button once again, the minute figure appears and press M to set the minute. When you adjust one of among the month, date, time, minutes, just keep press A button until the desired figure appears and press M to adjust. Press M to see the date. Generally A button is to select the function. (Month, Date, Time, Minute) M button is to adjust the function.

Dec 09, 2010 | Watches

1 Answer

Instructions for setting time & date of armitron watch 44/1001?


Set time time / date
Press and hold B (Mode) untill alarm hours flash
Press D (Alarm) to advance these
Press B (Mode) again, seconds will flash,
press D (Alarm) to advance these
Press C (Date), minutes flash, press D to advance these
Press C again, hours flash, press D to advance these
Press C again, month flashes, press D to advance these
Press C again, Date flashes, press D to advance these
Press C again, Date flashes, press D to advance

Nov 08, 2010 | Watches

1 Answer

Westclox model LTX271 instructions for setting day


mcdevito75 here, The stem on your westclox has 2 positions, First pull the stem out to set the time of day, keep cycleing the watch until you come to 1 day before the day you want. NOW! push the stem back in. NOW! slip a finger nail just under the crown and gently, gently kift the crown to it"s first position, it may take a little practice so be patient, once in it's first position you can change the DATE easily, change the DATE to 1 DATE before the DA you want, push the syem back in and pull the stem back out and set the day/date and time of day. Your watch is set and will change on time a little past mid nite.

Jul 22, 2010 | Bulova Watch

1 Answer

How do I turn off the alarm on my Armitron watch?


I don't know whether this is what you are looking for, as the watch comes with no packaged instructions OR general support, on their website, XD,

Nik.

http://home.earthlink.net/~eldonenew/armitron.htm

or

http://www.ehow.com/way_5786808_armitron-all_sport-watch-instructions.html



Armitron All-Sport Watch Instructions By Brian Walker eHow Contributor 9 Found This Helpful The Armitron All-Sport is a unisex style of watch made by Armitron that features a digital readout and four buttons around the outer dial for adjusting various aspects of the watch. It can set alarms, keeps the time as well as the date, and has a built-in backlight. Accessing and adjusting these various settings is a fairly simple process.

Other People Are Reading


Setting Date, Time and Alarm
  • To enter the date and time setting mode, press and hold the "mode" button, located on the top-left of the watch. Continue holding this button until the display begins to flash. This first display is the alarm setting, should you choose to set an alarm to go off. If you'd like to set the alarm, use the "alarm" button on the bottom-right of the watch to advance the hours to the desired one. Then press the mode button again; this will cycle through the minutes and seconds of the alarm to allow you to set those as well. Once you have set the alarm, you can press the "date" button at the top-right of the watch to proceed to the regular time setting. These numbers, which will now be flashing, also are adjusted by pressing the alarm button to change them. Pressing the date button again will now cycle through the hours, minutes, seconds and the date. As you continue to press the date button, the All-Sport will continuously cycle through these options; don't worry if you forget to set one, you can simply press the date button a few times until you get back to the setting you need to change. Once the alarm, time and date have all been set, you can press the mode button one more time to exit to the normal watch mode that will display the date and time.
Using Chime and Alarm
  • The Armitron All-Sport features both an alarm and an hourly chime. The alarm function will cause the watch to continuously beep at the selected time until you turn it off by pressing a button. The chime will cause the watch to beep once every hour. You can turn both these features on and off by pressing and holding the alarm button and while holding it pressing the date button. The first time you do this, the chime will turn on and a small house symbol will be displayed on the watch face. Performing this button-pressing sequence again will turn on the alarm, which in turn displays a small clock icon on the watch face. Each successive pressing of this button sequence will alternate between the chime and the alarm, turning them either on or off.
Backlight
  • The All-Sport also features a built-in backlight to help you view the watch in dark conditions. This light can be activated by pressing the "light" button on the bottom-left of the watch. Pressing this button is the only way to activate the light, and doing so will only cause the watch to illuminate for a few seconds at a time.


Read more : http://www.ehow.com/way_5786808_armitron-all_sport-watch-instructions.html

Jul 20, 2010 | Armitron Round Digital Sport 408089 Watch

1 Answer

I would need to set the time on my timex WR50M watch and I have missed place my instruction sheet. I would need th instructions Thank You


Hi fuscoromeo,

To set the digital time and date on your Timex, please follow the steps below.

Timex Digital Watch

1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.

2. Press the "Date Advance" button on the upper right side. This will reset the seconds.

3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.

4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.

5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.

6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.

Hope it helps.

Thank you for using FixYa.

Nov 02, 2009 | Timex 1440 Nylon watch

2 Answers

Need instructions for Timex 1440 Sport watch


TIME AND DATE
1. Press and hold MODE until HOURS digits flash (you'll be in Alarm Mode) Press MODE again to enter TIME mode, SECONDS digits will flash.
2. Press ADJUST to set SECONDS to zero.
3. Press START/STOP to select MINUTES.
4. Press ADJUST to change.
5. Repeat to set HOURS, MONTH, DAYS, and DAY of WEEK. Go through 12 hours to set AM or PM.
6. Press MODE when done.
7. To display DATE from Time display , press START/STOP.
8. With DATE displayed press and hold START/STOP, then press ADJUST to change display between DATE-MONTH and MONTH-DATE.
9. With TIME displayed, press and hold ADJUST, then press MODE to switch between 12-and 24-hour format.

ALARM AND HOURLY CHIME
1. Press and hold MODE until HOURS digits, DAY, and A or P (for AM or PM) flash.
2. Press ADJUST to change HOURS digits. Go through 12 hours for AM or PM.
3. Press START/STOP to select MINUTES.
4. Press ADJUST to change.. Press MODE when done.
5. Press and hold ADJUST, then press START/STOP to turn chime on/off. Press START/STOP again to turn alarm on /off. Release START/STOP when done.

CHRONOGRAPH
1. Chronograph will count up to 24 hours. Lap times are not stored. After 40 minutes chrono display changes from seconds to minutes.
2. With time displayed, press MODE to select Chrono Mode.
3. Press START/STOP to start.
4. Press ADJUST to view lap time. Press again to sesume lap timing.
5. Press START/STOP to stop timing . Press ADJUST to reset chrono to zero.
6. Repeat for successive laps.

Nov 22, 2008 | Timex 1440 Nylon watch

13 Answers

Setting Bench Watch


Reset Instructions Bench. (BC0013BR)


Time and Location
If you hold in the light, start and the reset button for a few seconds a screen will appear with the 12h or 24 h clock setting and also the date and country.

Once you have that screen if you press the mode button it will move over the date and clock etc then you just press the reset button and start button to choose the date and time.

Once you have changed the date and time to the correct date press the light button, start button and reset button and it will save the settings.

Alarm
Hold in the light, start and the reset button for a few seconds a screen will appear
press the mode button it will move over the date and clock etc then you just press the reset button and start button to choose the date and time. Use the light button to set the screen.

Feb 27, 2008 | Watches

Not finding what you are looking for?
Bulova Watch Logo

Related Topics:

1,471 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bulova Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Geoff

Level 2 Expert

64 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Bulova Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...