Question about Toshiba 46RV525U 46 LCD TV WIDESCREEN 1080P FULLHD HIGH-GLOSS B

1 Answer

Toshiba 46RV525U, Ceramic or Glass 8A Fuse

I have a Toshiba 46" LCD Model: 46RV525U that was given to me. The fuse blew and the previous owner removed and lost it. I'm trying to obtain a new fuse but need to know if it's Ceramic or Glass. T 8.0A H/250V is on the board. See photo of the missing fuse http://www.haygoods.net/fuse.jpg

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toshiba Master
  • 8,617 Answers

You can replace it with a regular glass T 8.0 amp fuse 250V and you will be in specs with the original.

Posted on Jan 09, 2013

  • Gary Haygood Jan 09, 2013

    Found a local TV guy that told me that I could do that, just use a 10A and it would be fine.

  • Sonny Berry
    Sonny Berry Jan 10, 2013

    No dont put a 10A in thats very dangerous because if there still is a problem that fuse wont blow untill it gets in excess of 10Ampps and that can cause alot of items such as resistors and diodes get smoked causing alot of extra damage. always use the same rated fuse if it then blows again the power supply has a short but installing a larger amp fuse can cause further damage in the event of a short.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
budmrtn
  • 11361 Answers

SOURCE: my toshiba tv doesn't turn on and there is no

Look at one of the power supply output connector pin, there should be 5vdc all the time the minute you plug the TV into the wall outlet, if you do not have the standby 5vdc, nothing else will work. No sign of burnt parts, bad capacitors? You can get parts here: http://www.shopjimmy.com/catalogsearch/result/index/?q=Toshiba+37HL67+&p=2&stock=all
Please post feedback what you find.

Posted on Dec 14, 2009

  • 1779 Answers

SOURCE: Inverter Board

Go to encompassparts.com they have it and you can download the svc manual.

Posted on Dec 21, 2009

  • 26 Answers

SOURCE: Need fuse for Panasonic 42 plasma. T8AH 250V with

Radio Shack.

Posted on Dec 28, 2009

  • 1 Answer

SOURCE: i have a vertical red line on 46 inch lcd it is 2

I also have this problem on a set that is a year and a half old. The repair man was here yesterday with some parts that didn't fix the problem...he said the screen needs to be replaced! Luckily I bought from Costco, who extends the warranty by a year, so we won't be out any money. They will be getting back to me with what they are going to do...repair or replace...depending upon what is most cost effective for them. I will be trying to purchase extended warranty for this TV, if repaired, or new TV, if replaced. Too many horror stories out there on all brands not to.

Posted on Jun 12, 2010

  • 8457 Answers

SOURCE: FUSE KEEPS BLOWING ON MY TOSHIBA MODEL 26AV502U TV

The power supply board have trouble with it many power supply transformers.That why u getting to must current and keep killing the fuse.U have electronic skills and troubleshooting skills check all those input and output of those power supply tranformers coils,replaced the wright dead tranformer,will solved this problems.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Posted on Nov 17, 2010

Testimonial: "thank you for your responce"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, sorry for my english. I have Toshiba 46RV525U. The screen have verticals lines and the image doubles, just on the left side.


If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.

Aug 08, 2016 | Toshiba Regza 46RV525U 46 in. LCD HDTV

1 Answer

Where can i buy the ceramic fuse for my toshiba flat screen?


Hello,

That model uses a e.t8ah250vp fuse and they are available here:

http://www.ccl-la.com/catalog/product_info.php?products_id=316

The fuse is located inside on the power supply board.

Mar 27, 2013 | Toshiba 40E200U 40-Inch 1080p LCD HDTV

1 Answer

My bass amplifier requires a ceramic fuse T10H250V. Where can I find one exactly like it?


hi,

Fuse breaks when it has succeeded in limiting further damage.


Check for other possible shorted electrical and electronic

components.


• Could be drive transistor , output transistor or both on the main amp.

But check for power supply and in the preamps also.


• Measure supply voltages,

• Check DC offset voltage

• Check idling current (main amp)

Isolate , and trace afterwards.

Aug 22, 2012 | Behringer Audio Players & Recorders

2 Answers

My Toshiba regza 46" doesn't


Hi,
Here are some basic steps that will help you fixing the problem.
I'm assuming that your unit is dead set without an standby LED light and your outlet is live.1.Power cord -check the cord it might be opened (no continuity).This is due to frequent bending,pulling.2. Power switch- check for dry joints, open contact.3.Check the internal fuse- sometimes the fuse fail because of thepower surge, replacing with new one will cure the problem, If this is the case I would advice you to use surge protector/AVR (Automatic Voltage Regulator). However if the fuse blew again this is an indication that you have ashorted partsin the power supply, you may visit the linkhttp://www.fixya.com/support/r8053361-fuse_keeps_blowingfor more info. If no reaction and still the unit didn't power up then you have an open parts on the power supply.
4.If you see that the fuse isintact, don't attempt to touch anything because there somefatalcomponents stored electricity enough to hurt you with a simple mistake only. I would advice you to look fora professionalto troubleshoot the power supply. If you want to repair it yourself make sure that you have necessarytools and test instrument. First checkbadsolder joints(re-solder all cold solder),leaky electrolytic capacitor(sometimes it hasbulgedat the top but not all, you better have a capacitor checker), open/shortedregulatortransistor/IC(mounted in heat sink),open fusible resistor(caused by shorted regulator Transistor/IC), shortedzener diode.
You may also replace the power supply board, try online like ebay.com and shojimmy.com.
Also check if your unit is under warranty before opening the back panel, it will void the warranty. Avail it because the manufacturer of your unit will fix it for free or a little charge only.
Hope I helped you.
Have a nice day!
Thanks for using fixya.
JDVillanueva

May 05, 2011 | Toshiba Regza 46RV525U 46 in. LCD HDTV

1 Answer

Toshiba 46RV525U are JUNK!


The LCD panel is defective. They are expensive. Call customer service and they may extend the warranty for you if you complain enough.

May 27, 2010 | Toshiba Regza 46RV525U 46 in. LCD HDTV

3 Answers

I have a Philips 42" Plasma that will not power up, blown T8AH


http://www.newark.com/littelfuse/0215008-mxp/cartridge-fuse/dp/42K9308

Fuse is a "Littelfuse 0215008.MXP"
8A 250V Slow-blow ceramic

Jul 29, 2009 | Toshiba 50HP95 50 in. Plasma Television

2 Answers

Philips fuse t8ah250vp


http://www.newark.com/littelfuse/0215008-mxp/cartridge-fuse/dp/42K9308

Fuse is a "Littelfuse 0215008.MXP"
8A 250V Slow-blow ceramic

Dec 10, 2008 | Televison & Video

6 Answers

My dead 42" plasma - power problem


I have same issue with Samsung HP-S4253 Plasma. The fuse is a Littlefuse (manufacturer they do not sell), I have search and called over 20 places and the latest is Fuses Unlimited but it is discontinued and they do not stock but they can order. I will not be able to contact them until the holidays are over. There most likley is a minimum order. If there are other fuses you need write down part #'s so you can fill the minimum if required.

If there is anyone out there that can help with finding these hard to find fuses it would be appreciated.
There are most likey other Plasmas or TVs that use the same fuse just have to figure out witch ones they are.

Fuses on Power Supply Board: The 8 amp is the one I require.
T8AH250V P
T10AH250V

Break Down of Fuse Description:
T = Time Lag
8A = 8 Amp
H = High Breaking Capacity (Ceramic) 1500A @ 250V AC
250V = 250 Volts
P = RoSH Compliant

Aug 25, 2008 | Toshiba 50HP95 50 in. Plasma Television

Not finding what you are looking for?
Toshiba 46RV525U 46 LCD TV WIDESCREEN 1080P FULLHD HIGH-GLOSS B Logo

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...