Question about Dryers

1 Answer

Can't get the door back on - Dryers

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Expert
  • 314 Answers


Instructions

1

Open the door to the dryer and remove the screws in the hinge. Lay a towel on top of the dryer. Place the dryer door on the towel with the inside facing up.
2

Remove the screws from the inside of the dryer door. Disassemble the dryer door carefully, removing the cover on the right side of the innermost section of the door and the shield and hinge from the left side of the innermost section. Reattach the side cover to the left side of the innermost part of the door. Install the new shield to the right side of the door section, with the flat side against the door and the notches facing up (they will face into the dryer). Attach the hinge on the same side as the shield.

3

Set the top section aside. Rotate the remainder of the door 180 degrees so that the handle is on the left of the upside down door. Check that the latch aligns with the cover before screwing the door back together. Screw the hinge into the corresponding holes on the left side of the dryer door frame. Remove any stickers that might be blocking the holes.
4

Check the alignment of the door by opening and closing it several times. Loosen the screws on the hinge and nudge the door slightly until the fit is correct. Tighten the screws into place.

Posted on Jan 10, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford ZX2 courtesy lights and chimes


Sounds like a problem with the sensor in the driver's door latch.

Jun 28, 2013 | 2002 Ford ZX2

1 Answer

Back door close lock


check 2 c if the door latch isnt alredy closed if it is pull handel and use screw driver 2 flip it back out

May 12, 2013 | Hyundai Entourage Cars & Trucks

1 Answer

My front doors won't open on 1997 toyota avalon


The door gaskets could be frozen to the body, or you could have ice in the door latches.
Can you drive the car into a warm garage ?

Jan 31, 2013 | 1997 Toyota Avalon

1 Answer

Ford fiesta 2003 drivers door will not unlock


How do you setup A, B, A+B speakers. There is only one button to push. One push shows speaker 'A', each time you push it again, shows nothing, not 'B', not 'A+B' but goes back to Speaker 'A' ? jorgcm@hotmail.com

Mar 01, 2012 | Cars & Trucks

1 Answer

The Driver's side door of our 1996 Saturn Stationwagon won't catch when you close the door. In otherwords, if I drove the car, I can close the door but it doesn't catch and therefore the door...


first make sure the bolts which hold the latch mechanism to the door are firmly screwed in. if that ain't it, remove the post which it clamps onto from the door jamb and switch it with one from a back door. close the back door firmly, lock it and never use it again. if that ain't it go to www.getsaturnparts.com and buy yourself a new door latch mechanism and pay an auto glass shop to put it in for you.

Sep 07, 2011 | Saturn SW2 Cars & Trucks

1 Answer

I have a whirlpool electric range model no. RF378LXKQ0. I removed the door and now I can't get it back on. I didn't relalize I was to put the pins in and I don't even see where they go.


**** the hinge to the broil position. Put a nail or something so the hinge won't pop back in the door when you go to put it back. Once ya have it back in the stove, remove the nail and close the door.

Sep 07, 2011 | Whirlpool RF378 Electric Kitchen Range

1 Answer

CTS 2010, RKE system does not work for the driver door. The key is in my purse, my purse on my shoulder and the driver's door only refuses to open even if I hear the doors unlocking. It's driving...


if you are hearing clicking noise but the door won't open then the door lock actuator is not releasing the lock. not uncommon problem ,but the car is still new. most of the time this type of problem starts after 5or6 years. I hope your car is still under warranty.

Aug 12, 2011 | 2010 Cadillac CTS

3 Answers

2006 buick lucerne back doors won't open


My friend just had this problem and he reached in and pulled the inside door handle back as far as it would go, and then let it go, allowing it to 'snap' back. For some reason this fixed it. We have no idea why. By doing this on one door, both rear door locks freed up and the rear locks are now working. Before, both rear locks were stuck and you could not open the doors from the inside nor the outside. Not sure why it works, but maybe it will work for you!

Jun 10, 2011 | 2006 Buick Lucerne

Not finding what you are looking for?
Dryers Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Brad Brown

Level 3 Expert

16043 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...