Question about Kenmore 24902 Top Load Washer

1 Answer

Kenmore makes whining noise as it tries to spin

I have a Kenmore 80 series 110.92480200 washing machine. When it went to the spin cycle it made a loud noise and it makes this whining noise as it tries to spin but doesn't. What do you think the problem is??

Posted by on

  • 1 more comment 
  • gfellis Jan 21, 2009

    Thank you so much for your response....I am looking up the part for my machine and it guess what you are mentioning is the same as a coupling motor??

  • gfellis Jan 21, 2009

    I fixed the coupling and now that works. I filled the machine and started it....sometime later I came back to check it and water was all over my garage and floors. I guess it keeps filling with water but at the next cycle it refills? Do you know what I did? Probably didn't put something back together.....your input would be greatly appreciated!!

  • gfellis Jan 22, 2009

    Thank you!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 8,147 Answers

The drive coupling has probably broken. Usually happens when you overload the machine. Easy fix. READ MORE

Posted on Jan 21, 2009

  • Dan Webster
    Dan Webster Jan 21, 2009

    Part number 285753



  • Dan Webster
    Dan Webster Jan 22, 2009

    When you replaced the case you probably pinched the air tight tube that runs from the bottom of the tub up to that water level switch. If it cannot judge the water level pressure then the water will just keep on comin in. If that ain't it then remove the hose from the switch and blow the sediment out anyway so the air pressure can make the switch work all propah.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 90 plus series washer won't spin, barely agitates, will drain - but makes loud noise


It sounds like the transmission is done. Can't pinpoint what it is exactly, but I would start there.

Aug 21, 2012 | Kenmore Washing Machines

1 Answer

My kenmore series 80 washing machine makes a clicking sound during the spin cycle.


Might be something lodged in the drain pipe on the drum, such as a coin or similar object.

Dec 20, 2011 | Kenmore Washing Machines

1 Answer

I have a Kenmore series 80 washer that is making a loud clunking


check the motor coupler between the gearcase and motor for wear. If it is cracked or broken it will need to be replaced

Jan 04, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 80 series 110 washer making loud noise during final spin


Make sure all springs are still in their place tilt the machine back and look under it and you can see them. 2nd all legs must be level as well as the floor.

Dec 21, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore series 80 washer makes loud knocking noise during spin cy


Unless your front loader is set firmly on concrete and leveled to perfection, the force of a heavy wash load spinning in excess of 1000rpm will create a bit of vibration and noise.A firm footing is your best defense against to much movement.
Also due to the earlier movements during the spin cycle, the shocks that are used to dampen the spin cycle might have been broken or damaged.
If the problem persists inspite of proper levelling, please do check for the shocks or might have them replaced them for good.

Dec 14, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 80 series washer make high pitched whining noise


cold water screen in hose was half plugged causing it to either shut off the spin cylce due to lack of water or increase the spinning speed.
Hope this solves the problem.

Dec 10, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore Series 80: Loud clicking at spin cycle


sounds like spin tube bad will need to remove basket and gearcase to remove it

Sep 30, 2008 | Kenmore 20172 Top Load Washer

1 Answer

Washing machine


it could be the break above the transmission. it engages what looks like break shoes when the machine is not spinning. if these are worn down to the rivets then it will make this noise. it requires a special tool to replace.0de7df9.jpg

Jul 14, 2008 | Kenmore 23822 Top Load Washer

2 Answers

Washing machine making whining noise during spin only


Yes, bearing, most definitely. It is a cheap part but difficult to replace.

Apr 11, 2008 | Washing Machines

Not finding what you are looking for?
Kenmore 24902 Top Load Washer Logo

511 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...