Question about Whirlpool RF378 Electric Kitchen Range

Open Question

Whirlpool RF 374 PXDN Electric Range

Oven door handle is loose.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
MicrowaveSvc
  • 9085 Answers

SOURCE: door handle

You can usually find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383

I recommend that you do not remove the door or hinges to do the job because if it's not aligned exactly, you can have microwave leakage.

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the screws you need to remove.

We're happy to help and we appreciate your thoughtful rating of our answer.

3765e7c.jpg

Posted on Apr 20, 2008

Ad
BNewberry
  • 93 Answers

SOURCE: I have a Whirlpool Self

Sounds like you have a defective oven Temperature Sensor Probe.

Let Me know if this helps you out.

Posted on May 15, 2008

MicrowaveSvc
  • 9085 Answers

SOURCE: door handle

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the previously hidden screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here.

There should also be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting & testing.

We're happy to help you and we'd appreciate your thoughtful rating of our answer.

47f5d07.jpg

Posted on Jul 28, 2008

SOURCE: Whirlpool self-cleaning electric built in oven

I have the same problem. Who has a solution?

Posted on Aug 24, 2008

  • 311 Answers

SOURCE: can't put oven door back on

Hinge has a small hole in it. Lay door flat on rug. Take a pair of channel locks and tension hinge past hole. Put a screw in hole to hold it open. Then put door on product. Remove screws. Thanks, please leave feedback or contact me again for more info if you need it.

Posted on Nov 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you tighten the oven door handle on a whirlpool electric range


Remove door from range and lay on flat surface inside face up. remove 2 screws at top and screws along bottom edge(4 to 6). The inside of the door should lift off. You will then see the screws that hold the handle on at the top of the inner side of the front half. Snug up the screws but don't over tighten if the screws pass through the glass panel. You don't want to crack the glass.

Feb 28, 2015 | Whirlpool Kitchen Ranges

1 Answer

Oven door handle is loose on Model RF366BXD self cleaning range, how do we tighten the door handle?


Extend your door hinges and remove entirely over to a table or other flat surface where you can do a step-by-step dis-assembly. Unfortunately, to get at the interior of the handle unit, it's the final stage of the taking apart. Begin by removing the bolts at the bottom of the door, then the main panel and side flanges can be removed. (You can give your glass a good cleaning at this point also.) There are 2 bolts to remove to free up the handle unit, and now you can easily tighten (or replace as needed) the 2 pairs of handle bolts. Reverse your order to re-assemble, and put your door back on the oven. It's not as bad an exercise as it would appear. Just take your time and watch what you're doing. I used the hinges as a shim, and had it laid out on a pool table for easy, elevated examination.

Dec 09, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

Took apart glass oven door on a whirlpool. Where


Hello, bd_lft_up.gif bd_top_bg.gif bd_rt_top.gif bd_lft_bg.gif OVEN DOOR bd_rt_bg.gif bd_wpl_oven_door1.gif bd_wpl_oven_door2.gif clear.gif bd_lft_btm.gif bd_btm_bg.gif bd_rt_btm.gif Oven Door

#1 -- Oven door liner
#2 -- Oven inner glass
#3 -- Oven door hinge
#4 -- Retainer, glass
#5 -- Bracket, handle
#6 -- Door glass seal, top
#7 -- Door glass seal, side
#8 -- Oven outer door glass
#9 -- Door handle
#10
Read more: http://www.appliancepartspros.com/bd_whirpool_oven_parts.aspx#ixzz0pj5Z78oi
http://www.appliancepartspros.com .
Hope this helps.
Thanks

May 30, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

The screws holding the handle on the oven door have come loose. How do you get at the screws to tighten them? It is a Whirlpool range designer model.


Without a model #, I would say you need to take the oven door off and disassemble it to get at the screws holding the door handle. Some models have screws going right through the door to hold the handle on. Best of to call a certified repair company such as Sears.

Mar 20, 2010 | Kitchen Ranges

1 Answer

Kenmore Electric Range - Door handle Original bolts installed at the factory came loose and dislodged from the door handle.... no problems but this... i can not screw the handle back myself.. i tried......


We had the same problem. We had some tough epoxy that we squirted into the bolt holes, then screwed the bolts in. It took two of us, one to hold the door together and one to screw in the bolts. We didn't use the oven until the epoxy set, but now we no longer have a problem with the door falling apart every time we open the oven door!

Sep 28, 2009 | Kenmore 96213 Electric Kitchen Range

2 Answers

Loose oven door handle


I had the same problem. We took the door off completely & turned it upside down. There are screws on the bottom of the door, take them out, take off bottom trim piece that holds the outside glass panel in place, remove glass panel and you can access the door handle screws and clean the inside of the glass while you are at it.

Jan 05, 2009 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

Self cleaning oven directions


MAKE SURE OVEN IS EMPTY LOCK OVEN DOOR AND TURN OVEN SETTING TO CLEAN, IF YOU HAVE A VENT TURN IT ON THERE WILL BE SMOKE! LET RUN TWO HOURS,TURN OFF,LET COOL BEFORE TRYING TO UNLOCK IT (WILL NOT UNLOCK WILE STILL HOT!) OPEN DUST OUT ASH ITS CLEAN!!!

Dec 07, 2008 | Whirlpool GR465LXLS Electric Kitchen Range

2 Answers

Whirlpool oven


There is a fan in the oven, it is behind a panel at the rear.It will be a loose fan or worn bearings, or fan catching grill

Nov 09, 2008 | Whirlpool RBS275PD Electric Single Oven

Not finding what you are looking for?
Whirlpool RF378 Electric Kitchen Range Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

5189 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...