An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: Washer won't spin!
I doubt if that would affect it unless you got the chain between the inner and outer tub. The pump might have a coin in it. Tip the washer back,remove the belt and turn the pump by hand to see if it is locked up.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
We have a Maytag Performa G3300 that we bought on 8/13/2001. It still works great, but on 2/25/10 it stopped heating. We found that by removing the front panel and vacuuming the accumulated lint on the inside of the dryer and the door, the problem was resolved. There were no parts to replace, just vacuuming.
i would say it would defantly be worth looking at if it just something stuk in the pump or motor and no parts are needed it would be worth the repair if it needs a part the repair man should let you know how much the part is and you can compair that to the price of a new machine they start around 300 -350 a service call have the machine checked could run between 50 - 100 don't know what people charch where you are
Hold the bottom part of the Agitator,(The part that you are talking about),Undo the very top part in an anti-clockwise direction and it will come right off.Use a wrench to remove the nut on the top of the agitator and then lift it right out,you may need to move it from right to left.You will now be able to remove the necklace.Replace the Agitator the reverse of removal.